44net January 2023

44net@mailman.ampr.org

30 participants
17 discussions

by lleachii＠aol.com

Matt,Actually the makefiles/information are on Marius' page:http://www.yo2loj.ro/hamprojects/Seem credited to Bill, M1BKF.- Lynwood

3 years

Re: ampr-ripd 2.4.1 / openwrt

by lleachii＠aol.com

I've inquired here a few times. I went to check the wiki as I beleive someone made the requisite files to build and submit (I think I added the info); but the Wiki seems down, and there a grant submission page in its place.- Lynwood -------- Original message --------From: Matt Peterson via 44net <44net(a)mailman.ampr.org> Date: 1/27/23 19:45 (GMT-05:00) To: lleachii(a)aol.com Cc: Harold via 44net <44net(a)mailman.ampr.org> Subject: [44net] Re: ampr-ripd 2.4.1 / openwrt Lynwood,Has there ever been an effort to get a pre-compiled package(s) into OpenWRT?--MattOn Fri, Jan 27, 2023 at 3:17 AM lleachii--- via 44net <44net(a)mailman.ampr.org> wrote:Harold,At https://downloads.openwrt.com - on the same page that you find the image for your router.At the bottom of the page, there's a download for your relevant Software Development Kit (SDK). Everything is included in the SDK.The SDKs are made to work on Linux x86_64. The only method is to cross compile. The OpenWrt Wiki has a cross-compile page. All linked on the AMPR Wiki page.73, Lynwood KB3VWG -------- Original message --------From: Harold via 44net <44net(a)mailman.ampr.org> Date: 1/27/23 02:37 (GMT-05:00) To: 44net(a)mailman.ampr.org Subject: [44net] ampr-ripd 2.4.1 / openwrt Ok I know there are A LOT of post from the PAST about compiling ampr-ripd for OpenWRT but for the last few days, I have been racking my brain tryingto get this thing to compile for the router that I would like to use for my gateway but I think I broke my brain....I know Lynwood has done some extensive posting on this but things are just not working out for me. Many different errors when trying different processes.So, I would like to ask...1st, for those that are cross-compiling, what development environment are you using such as, linux version, the dependencies needed for that environment to work, and what versionof ampr-ripd are we cross-compiling for use in OpenWRT? I would like to build the setup as someone who is successful with these processes.Once that is done, Ill move on to the next step and try my hand at compiling ampr-ripd again for my target device.Baby steps.Thanks for any direction with this...HaroldK7ILO_______________________________________________44net mailing list -- 44net(a)mailman.ampr.orgTo unsubscribe send an email to 44net-leave(a)mailman.ampr.org_______________________________________________ 44net mailing list -- 44net(a)mailman.ampr.org To unsubscribe send an email to 44net-leave(a)mailman.ampr.org

3 years, 1 month

Re: ampr-ripd 2.4.1 / openwrt

by lleachii＠aol.com

Harold,At https://downloads.openwrt.com - on the same page that you find the image for your router.At the bottom of the page, there's a download for your relevant Software Development Kit (SDK). Everything is included in the SDK.The SDKs are made to work on Linux x86_64. The only method is to cross compile. The OpenWrt Wiki has a cross-compile page. All linked on the AMPR Wiki page.73, Lynwood KB3VWG -------- Original message --------From: Harold via 44net <44net(a)mailman.ampr.org> Date: 1/27/23 02:37 (GMT-05:00) To: 44net(a)mailman.ampr.org Subject: [44net] ampr-ripd 2.4.1 / openwrt Ok I know there are A LOT of post from the PAST about compiling ampr-ripd for OpenWRT but for the last few days, I have been racking my brain tryingto get this thing to compile for the router that I would like to use for my gateway but I think I broke my brain....I know Lynwood has done some extensive posting on this but things are just not working out for me. Many different errors when trying different processes.So, I would like to ask...1st, for those that are cross-compiling, what development environment are you using such as, linux version, the dependencies needed for that environment to work, and what versionof ampr-ripd are we cross-compiling for use in OpenWRT? I would like to build the setup as someone who is successful with these processes.Once that is done, Ill move on to the next step and try my hand at compiling ampr-ripd again for my target device.Baby steps.Thanks for any direction with this...HaroldK7ILO_______________________________________________44net mailing list -- 44net(a)mailman.ampr.orgTo unsubscribe send an email to 44net-leave(a)mailman.ampr.org

3 years, 1 month

Re: ampr-ripd 2.4.1 / openwrt

by lleachii＠aol.com

Harold,All recent versions of ampr-ripd have successfully compiled on my SDKs.- Lynwood

3 years, 1 month

ampr-ripd 2.4.1 / openwrt

by k7ilo＠outlook.com

Ok I know there are A LOT of post from the PAST about compiling ampr-ripd for OpenWRT but for the last few days, I have been racking my brain trying to get this thing to compile for the router that I would like to use for my gateway but I think I broke my brain.... I know Lynwood has done some extensive posting on this but things are just not working out for me. Many different errors when trying different processes. So, I would like to ask... 1st, for those that are cross-compiling, what development environment are you using such as, linux version, the dependencies needed for that environment to work, and what version of ampr-ripd are we cross-compiling for use in OpenWRT? I would like to build the setup as someone who is successful with these processes. Once that is done, Ill move on to the next step and try my hand at compiling ampr-ripd again for my target device. Baby steps. Thanks for any direction with this... Harold K7ILO

3 years, 1 month

Request: Blocking censys-scanner.com scans on AMPR subnets

by David Ranch

I was recently seeing a *lot* of scanning traffic from some of these censys-scanner.com IPs on my AMPR subnet. Personally, I consider crap like this as an attack yet people and companies think what they are doing is completely OK. Grrrr.. I imagine a lot of other AMPR subnets are also getting scanned which I don't think is OK. Maybe we can get their subnets BLOCKED at the UCSD Internet gateway? https://support.censys.io/hc/en-us/articles/360043177092-from-faq --David KI6ZHD

3 years, 1 month

Re: Request: Blocking censys-scanner.com scans on AMPR subnets

by lleachii＠aol.com

* I don't wish to opt out. I want the scanning. What I don't want are DDoS attacks, totally unrelated to the research.* Those are firewall instructions, the discussion was about AMPRGW blocking them.I must have been unclear, apologies.- Lynwood

3 years, 1 month

Ping my 44net address from internet

by Stephen Atkins

Should I be able to ping my 44net address (44.135.148.128/27) from anywhere on the internet? I'm running a dxspider on 44.135.148.130 but I can't seem to connect to it from the outside world (i.e. my work). I can ping the external IP my EdgeRouter-X but not the 44net one. Thanks Stephen Atkins VE6CPU/VE6STA/VE6SU Sent with [Proton Mail](https://proton.me/) secure email.

3 years, 1 month

wireguard gateway

by Scott Gillins

Does anyone preferably around the west half of the US have a wireguard gateway they would be willing to let me point at for my allocation? Thanks, Scott

3 years, 1 month

Info for today's community meeting

by Rosy Schechter - KJ7RYV

Hi folks, Our community meeting starts in just under an hour! Please find all info, including Zoom information, below. cc'ing our Communications Manager, Dan, and our Operations Manager, Merideth, in case you have any issues joining. Many thanks, Rosy // MEETING INFO Saturday, Jan. 21, 2023 1800 UTC (10am PT / 1pm ET / 6pm GMT / 7pm CET) Topics: * ARDC’s 2022 grants * Introducing our new advisory committee members * Report on the recent assessment of 44Net usage and technology <-- !!! // REPORTS! 2022 Annual Report - bit.ly/ARDC-2022 44Net Assessment - bit.ly/44Net-Assessment slides will be made available after the meeting // ZOOM INFO URL: https://us02web.zoom.us/j/87963536922?pwd=ZXNUT0JZaWhhQVRpNWt3SVdSeDhKZz09 Meeting ID: 879 6353 6922  Passcode: 88001  One tap mobile  +12532050468,,87963536922#,,,,*88001# US +12532158782,,87963536922#,,,,*88001# US (Tacoma) To dial in, use one of the following numbers:  +1 253 205 0468 US  +1 253 215 8782 US (Tacoma)  +1 346 248 7799 US (Houston)  +1 669 444 9171 US  +1 669 900 6833 US (San Jose)  +1 719 359 4580 US  +1 312 626 6799 US (Chicago)  +1 360 209 5623 US  +1 386 347 5053 US  +1 507 473 4847 US  +1 564 217 2000 US  +1 646 931 3860 US  +1 689 278 1000 US  +1 929 205 6099 US (New York)  +1 301 715 8592 US (Washington DC)  +1 305 224 1968 US  +1 309 205 3325 US  Meeting ID: 879 6353 6922  Passcode: 88001  Find your local number: https://us02web.zoom.us/u/kd4Rq0ZbDx -- Rosy Schechter - KJ7RYV Executive Director Amateur Radio Digital Communications (ARDC) ampr.org

3 years, 1 month

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

44net January 2023