23 Jul
2019
23 Jul
'19
5:58 a.m.
Ronen;
On Tue, 2019-07-23 at 10:44 +0000, R P via 44Net wrote:
3) make very simple system to connect to the net
(preferred by off the shelf routers such as Mikrotik or (less preferred) unix system as
Raspberry pi
it would be ideal to have an working image for raspberry pi for a gateway same as the
PISTAR does (pi star is a system that allow to make from Raspberry pi and external card
connected to analog radio a DMR gateway ider hotspot or repeater ) they provide
image that all you have to do is change some parameters (such as callsign and other small
thing ) and you are on even idiot can do it we need to do same for Pi gateway
If you would like, you can test out my "dotun" system which is designed
for any linux system. The end user needs to do only 2 things:
1 - set their router's DMZ to match the IP of their device/pc
2 - run the installer and answer 3 (?) questions about their amprnet
configuration.
That's it! As soon as they receive rip ipip should work for them.
Contact me offlist if you wish to try it out.
I also have Pi images for my URONode software which also has ipip
basically preconfigured. They've been available for a few years now.
I don't think it can get any easier than that without having to do the
typing for them... at least that was my goal when I made them.
--
Rain is caused by big, high-pressure areas; cold fronts; warm, moist air;
And the first day of your vacation.
-----
73 de Brian N1URO
IPv6 Certified
SMTP: n1uro-at-n1uro.ampr.org