27 Sep
2022
27 Sep
'22
6:15 p.m.
Hello Harold,
The ampr-ripd traffic does go over port 520 but within the IPIP tunnel
itself (IP protocol 4). To receive ampr-ripd traffic, you must have a
DNS entry assigned to one of your AMPR IPs. FInally, have you been able
to confirm if your ISP allows/forwards IP protocol 4 (IPIP)?
--David
KI6ZHD
On 09/27/2022 02:02 PM, Harold via 44net wrote:
Hey gang. Kinda new here for Ive been dabbling with
this for a few years though. I have been trying to use the ampr-ripd daemon without any
luck and have come to the conclusion that my ISP blocks port 520 which I believe is the
port used.
With that said, i have also come to the conclusion that at this time, the encap.txt file
is still accessible via ftp from the portal.ampr.org.
Is "wget ftp://USER:PASSWORD@portal.ampr.org/encap.txt" a valid ftp solution
and if so where is the USER:PASSWORD derived from?
Is it our user:password into the portal?
Thanks all
Harold K7ILO
_______________________________________________
44net mailing list -- 44net(a)mailman.ampr.org
To unsubscribe send an email to 44net-leave(a)mailman.ampr.org