Hmm, I think I had a keyboard problem.... So again in English this time:
There is an unused line in the script, which eats a lot of run time, which I forgot to remove.
I updated the scripts on the web, so please download again, or remove the line: :local routes [/ip route find pref-src=$myampr] ; in the obsolete tunnel check part (just before the last loop of the script).
Marius, YO2LOJ
-----Original Message----- From: Marius Petrescu Sent: Tuesday, April 12, 2016 10:24 To: AMPRNet working group Subject: [44net] Mikrotik RIPv2 AMPR Gateway Setup Script 1.6
(Please trim inclusions from previous messages) _______________________________________________ Hello,
I managed to optimize/change the Mikrotik router script so it has some 50% or less run time and less processor load compared to 1.5.
Download links (rsc script): http://www.yo2loj.ro/hamprojects/ampr-gw-1.6.rsc http://yo2tm.ampr.org/hamprojects/ampr-gw-1.6.rsc
Only main script as text file: http://www.yo2loj.ro/hamprojects/ampr-gw-1.6.txt http://yo2tm.ampr.org/hamprojects/ampr-gw-1.6.txt
Have fun, Marius, YO2LOJ
_________________________________________ 44Net mailing list 44Net@hamradio.ucsd.edu http://hamradio.ucsd.edu/mailman/listinfo/44net