Hi everyone,
I'm just starting to setup an AMPRNET node and am running into some difficulty setting up a Linux gateway using the rip44d daemon and was hoping someone has some pointers.
I've been following this guide: http://wiki.ampr.org/index.php/Ubuntu_Linux_Gateway_Example and start running into trouble once I try and get the rp daemon running. I've managed to download and extract the latest tar file from: http://www.yo2loj.ro/hamprojects/ampr-ripd-1.13.tgz and it seems to compile and install fine. The next step, according to the guide, is to run ./find_pass.sh but when I do that I get the error:
Tunnel socket: Setting SO_BINDTODEVICE: No such device
I took a look at the contents of the find_pass.sh file and it seems to contain the command ./ampr-ripd -d -i ampr0 so I decided to run ./ampr-ripd -d -i eth0 from the command line and I get the message:
Waiting for RIPv2 broadcasts...
but it never prints out the "secret" password. I am running Debian Jessie as my OS and have registered a gateway on the ampr portal. Just wondering if there's something obvious I'm missing here?
Cheers, Chris VE7ALB in Victoria BC||||