Re: [44net] How to config mikrotik router for IPIP (and more)

Thank you all I have a little progress I know the command to create a tunnel and created a tunnel to the UCSD router I now have to check if a route command also needed Tom I will email you the admin Password The Pi solution is also under check a Software person make for me a Pi unit and as soon as it will be checked we will also use it The problem i see is a leak of Keep It Simple Stupid info on the Wiki most of the info there is for fellows who know software and understand Scripts but i know RF & hardware and less Software When I wrote the Cisco info on the wiki i tried to make it as simple as possible to allow even non expert to be able to config routers (i hope i have succeeded) When the Microtik solution will work for me I will add it also to the wiki 73's Ronen - 4Z4ZQ http://www.ronen.org ________________________________________ From: 44Net <44net-bounces+ronenp=hotmail.com(a)hamradio.ucsd.edu> on behalf of Rob Janssen <pe1chl(a)amsat.org> Sent: Monday, April 4, 2016 3:04 PM To: 44net(a)hamradio.ucsd.edu Subject: Re: [44net] How to config mikrotik router for IPIP (and more) (Please trim inclusions from previous messages) _______________________________________________ This is why a Linux system (e.g. Raspberry Pi) running ampr-ripd is so much easier! Of course Ronen will not be able to figure that out himself, but maybe he could run it when a ready-made image is available for download. I have not yet tried Metarouter myself, always enough things to do :-) Rob _________________________________________ 44Net mailing list 44Net(a)hamradio.ucsd.edu http://hamradio.ucsd.edu/mailman/listinfo/44net