I can set it up to run with cron so that it emails you the list of commands needed to update it every hour. After a few hours of this, you may understand why it is provided as an automatic script!
This is why a Linux system (e.g. Raspberry Pi) running ampr-ripd is so much easier!
Did you ever try to run Linux under Metarouter and run ampr-ripd on that? I think an OpenWRT image is available that could be stripped down to a bare Linux system that could handle the tunnel routing as a Metarouter on certain types of MikroTik. (RB750, RB2011 etc)
Of course Ronen will not be able to figure that out himself, but maybe he could run it when a ready-made image is available for download. I have not yet tried Metarouter myself, always enough things to do :-)
Rob
Thank you all I have a little progress I know the command to create a tunnel and created a tunnel to the UCSD router I now have to check if a route command also needed
Tom I will email you the admin Password
The Pi solution is also under check a Software person make for me a Pi unit and as soon as it will be checked we will also use it
The problem i see is a leak of Keep It Simple Stupid info on the Wiki most of the info there is for fellows who know software and understand Scripts but i know RF & hardware and less Software When I wrote the Cisco info on the wiki i tried to make it as simple as possible to allow even non expert to be able to config routers (i hope i have succeeded) When the Microtik solution will work for me I will add it also to the wiki 73's Ronen - 4Z4ZQ http://www.ronen.org
________________________________________ From: 44Net 44net-bounces+ronenp=hotmail.com@hamradio.ucsd.edu on behalf of Rob Janssen pe1chl@amsat.org Sent: Monday, April 4, 2016 3:04 PM To: 44net@hamradio.ucsd.edu Subject: Re: [44net] How to config mikrotik router for IPIP (and more)
(Please trim inclusions from previous messages) _______________________________________________
This is why a Linux system (e.g. Raspberry Pi) running ampr-ripd is so much easier!
Of course Ronen will not be able to figure that out himself, but maybe he could run it when a ready-made image is available for download. I have not yet tried Metarouter myself, always enough things to do :-)
Rob
_________________________________________ 44Net mailing list 44Net@hamradio.ucsd.edu http://hamradio.ucsd.edu/mailman/listinfo/44net
-
R P -
Rob Janssen