[44net] Setting up RIP on JNOS 2.0h onwards ...

Maiko… I’m trying to see if my current running jnos 2.0m has the AMPRRIP compiled in. I looked at config.h and since most everything is hashed out (including the AMPRRIP stuff), how to tell what the defaults really are config.h ? Thanks, jerome > On Mar 31, 2020, at 11:22, Langelaar via 44Net <44net(a)mailman.ampr.org> wrote: > > Hi Gabriel and anyone else interested, > > Using JNOS (compiled with the AMPRRIP mod), the RIP works fine > 'for registered gateways' - unless I've misunderstood your question, > typical entry below (example only) : > > # > # 15Dec2019, Try to use RIP again now that it re-appeard > # > ip upstairs 224.0.0.9 > rip ttl 43200 > start rip > rip accept 44.0.0.1 > # > # remove our own from network > # > route add 44.135.x.y/24 loopback > # > > Maiko / VE4KLM > > , On 3/31/20 1:02 PM, Gabriel Medinas via 44Net wrote: >> Greetings to all, just to inform you that returning to teamwork at AmprNet, >> Venezuela is connected again, renewing some things in my local structure >> with the JNOS Linux program through yv5kxe.ampr.org (44.152.0.60). >> >> We are especially grateful to Chris - G1FEF who personally granted the >> possibility of this YV return on this network after 20 years. >> >> We are in settings, I am mainly working to adjust my old JNOS to the new >> dynamic of AmprNet especially to the RIP44d update that does not work in >> JNOS doing it manually, I am working on a project to use other compatible >> hardware to achieve other gateways for use APRS and the DXCluster yv5kxe. >> >> 73 de Gabriel YV5KXE >> yv5kxe.ampr.org >> _________________________________________ >> 44Net mailing list >> 44Net(a)mailman.ampr.org >> https://mailman.ampr.org/mailman/listinfo/44net > > _________________________________________ > 44Net mailing list > 44Net(a)mailman.ampr.org > https://mailman.ampr.org/mailman/listinfo/44net