No issues with turning them on as long as the RIP content is the same...
For the mikrotiks and possible others using individual tunnels , they can be switched only if you DO turn on the new sender, since they have defined tunnel endpoints and do not "cross-listen" for RIP.
Amprd was designed from the beginning to update its default route according to the gateway of 44.0.0.1 automatically, so it will expect a 44.0.0.1 via 169.228.34.84 and use the new one without any intervention.
I assumed this could happen some day so there is no hard coded reference for the gateway IP in any of the tools.
Sorry for the late response.
Marius, YO2LOJ
On 27.05.2017 01:24, Brian Kantor wrote:
(Please trim inclusions from previous messages) _______________________________________________ I can turn on the RIP sender in the new gateway any time, but I don't know about the wisdom of having both sending at the same time, even though they'll send the same content. Marius, what do you think?
- Brian
On Sat, May 27, 2017 at 12:29:46AM +0300, Marius Petrescu wrote:
Yes, but only AFTER the change, since the RIP broadcasts and the incoming internet connections are still via the old gateway.
44Net mailing list 44Net@hamradio.ucsd.edu http://hamradio.ucsd.edu/mailman/listinfo/44net