18 Oct
2022
18 Oct
'22
12:28 p.m.
The scripts used on the edgerouter which are installed by the ampr-ripd
package make use of that specific 'tun44' name to define routes and rules.
So, unless you change all the references in the scripts and wizard to
tun0, I would really recommend to follow the instructions as described
in the wiki and keep the name tun44 for it.
Not doing it correctly will give you a non-working system.
Marius, YO2LOJ
On 18/10/2022 20:18, Stephen Atkins via 44net wrote:
I'm trying to use the instructions at
https://wiki.ampr.org/wiki/Setting_up_a_gateway_on_Ubiquiti_EdgeRouter
and I thought everything was working but I'm having and issues.
eth0 is my internet at 50.93.51.24
eth1 is my 192.168.1.x network
eth2 is my 44.135.148.129
switch0 is 192.168.1.1/24
tun44 was setup using the instructions (used 44 instead of 0)
I added the protocols (changed next-hop to tun44)
Added all the firewall modifications (keeping table 1)
I have setup in the portal my gateway at 50.93.51.24 (Did this yesterday).
My linux box has two network cards. One on 192.168.1.110 and the
other is set to 44.135.148.130/27.
My problem is I can't ping from the outside world to my linux box on
the 44 network. On my linux box when I try and ping any 44 network
(like 44.60.44.10) none of the packets make it through. I tried
pinging 44.60.44.10 from the Edgerouter command line and it won't make
it either. I'm sure I missed something but I don't know what it might
be. Any help would be appreciated.
Stephen Atkins
VE6CPU/VE6STA/VE6SU
Sent with Proton Mail <https://proton.me/> secure email.
_______________________________________________
44net mailing list --44net(a)mailman.ampr.org
To unsubscribe send an email to44net-leave(a)mailman.ampr.org