Re: [44net] GW Setup Problem

Hi Tom,

Thanks for quick reply.

I am using ampr-ripd daemon which enables the UDP 520.. I can check its existency by command

nc -u <MY_IP> 520

Should I do something else... I am not hehind a firewall or any iother network equipment. My gateway is directly connected to INTERNET. My server has a real IP and all ports are open....

Thanks baris TA7W

----- Original Message ----- From: SP2L@wp.pl To: "44Net" 44net@mailman.ampr.org Sent: Wednesday, December 13, 2017 12:49:42 PM Subject: Re: [44net] GW Setup Problem

Hello Baris.

You need to enable udp port 520 for incoming packets.

Best regards. Tom - SP2L

_________________________________________ 44Net mailing list 44Net@mailman.ampr.org https://mailman.ampr.org/mailman/listinfo/44net