Hello Ronen
I still have floppy content around for 3com Ether ver 5.1 Etherlink pCI
the packer driver is two files
3c90xpd.com
and paket.txt
combined size 50kb
if interested
Paul g4apl gb7cip
In message <F68853C11CE8439DBB05A242D83C17FD@shanti>, Drorap
<drorap(a)netvision.net.il> writes
(Please trim inclusions from previous messages)
_______________________________________________
Hi there
i want to re alive a gateway running Jnos DOS (untill i will be eble
to replace it with the Cisco router im trying to config)
the old gateway i had used to be a PC with ISA
Currently all my PCs are PCI
i need a Packet driver for a well known PCI card (prefered intell
or 3 Com )
I used to have Packet driver for 3C905 (ISA)
Can i find any packet drivers for the PCI cards ?
If not is there any solution to run JNOS DOS with netcard ?
Im not a Software person so Suggestions to install linux and config it
for gateway are not practical for me (i can probebly install the
linux but certianly not add the Gateway Part (IPIP and JNOS )
Please advice
Thanks Forward
Ronen - 4Z4ZQ
http://www.ronen.org
---
This email is free from viruses and malware because avast! Antivirus
protection is active.
https://www.avast.com/antivirus
_________________________________________
44Net mailing list
44Net(a)hamradio.ucsd.edu
http://hamradio.ucsd.edu/mailman/listinfo/44net
--
paul(a)skywaves.demon.co.uk