21 Mar
2016
21 Mar
'16
12:35 p.m.
On Mon, Mar 21, 2016 at 9:47 AM, R P <ronenp(a)hotmail.com> wrote:
The Cisco Router sit in the DMZ I have made in the
TL741ND and the AMPRNEET works fine
I want to move it to the Regular Network Because the EchoLink Node need also DMZ so if
I can free the amprnet to non DMZ the echo link will sit on the DMZ
but in order to do it i need to know the TCP/UDP Port ... if any at all
Similar to the way others have said it, there is no TCP or UDP ports
that can be forwarded for IPENCAP because it doesn't use either TCP or
UDP. It's a layer 4 protocol just like them and ICMP.
Unfortunately, since your router doesn't likely allow forwarding other
layer 4 protocols through the firewall, that means you have no choice
but to leave the Cisco device in your DMZ.
On the other hand, EchoLink and IRLP nodes do use TCP/UDP and have
well documented port forwarding rules.
EchoLink:
UDP 5198 & 5199
http://www.echolink.org/firewall_solutions.htm
IRLP:
TCP 22 - SSH
UDP 2074 through 2093 - IRLP Audio
TCP 15425, 15426, 15427 - IRLP Control/Update Ports
http://www.irlp.net/faq.html#q29