Folks, I have my Gateway up and running for weeks. Yesterday power went out and after that my Gateway stopped working. Burn new image and starting it all over again, no cigar.
Swapped new Raspberry Pi, replaced power supply. Internet connections anywhere in the house are working normally.
Tried running ampr-ripd again but never got past "Waiting for RIPv2 broadcasts..."
What should I be looking into next?
root@44GW:/home/r0ot# ampr-ripd -v -d -i tunl0 Using metric 0 for routes. Using TCP window 840 for routes. Using routing table 'main' (254). Loaded 733 entries from /var/lib/ampr-ripd/encap.txt Max list size: 1000 entries Detected tunnel interface address: 44.60.73.14 Interface detected: lo, IP: 127.0.0.1 Interface detected: eth0, IP: 192.168.80.196 Interface detected: eth1, IP: 44.60.73.1 Interface detected: wlan0, IP: 192.168.80.191 Interface detected: tunl0, IP: 44.60.73.14 Assigned tunnel interface index: 5 Local IPs: 127.0.0.1 192.168.80.196 44.60.73.1 192.168.80.191 44.60.73.14 Using gateway 192.168.80.1 for direct 44net endpoints via interface eth0. Setting routes (733). Creating multicast RIP UDP listening socket. Setting up multicast interface. Waiting for RIPv2 broadcasts...
---
73, Kit