Very good info. I will definitely keep that one in mind as I continue this venture.
Thanks Marius
Harold K7ILO
From: Marius Petrescu marius@yo2loj.ro Date: Tuesday, September 27, 2022 at 2:21 PM To: k7ilo@outlook.com k7ilo@outlook.com, 44net@mailman.ampr.org 44net@mailman.ampr.org Subject: Re: [44net] ftp access to encap.txt Harold,
Since the RIPv2 packets are sent IPIP encapsulated from amprgw to your registered gateway, it has nothing to do with your ISP blocking that port.
If your IPIP tunnels are working, so will the RIP delivery. On the other hand, if your ISP blocks IPIP (IP protocol 4), none of the tunnels will work and all efforts are futile.
Marius, YO2LOJ
On 28/09/2022 00:02, Harold via 44net wrote:
Hey gang. Kinda new here for Ive been dabbling with this for a few years though. I have been trying to use the ampr-ripd daemon without any luck and have come to the conclusion that my ISP blocks port 520 which I believe is the port used.
With that said, i have also come to the conclusion that at this time, the encap.txt file is still accessible via ftp from the portal.ampr.org. Is "wget ftp://USER:PASSWORD@portal.ampr.org/encap.txt" a valid ftp solution and if so where is the USER:PASSWORD derived from? Is it our user:password into the portal?
Thanks all
Harold K7ILO _______________________________________________ 44net mailing list -- 44net@mailman.ampr.org To unsubscribe send an email to 44net-leave@mailman.ampr.org