Andrew,
I agree with Ronen, NAT maybe difficult setup.
Have you tried using the ip address from FastEthernet0/0 (10.111.111.11) and the tunnel source?
Jerry, KD4YAL
On Fri, Mar 11, 2016 at 5:48 PM, R P ronenp@hotmail.com wrote:
(Please trim inclusions from previous messages) _______________________________________________ From what I see i think you have one major problem
- the tunnel source address should be NON ampr Ip (ie commercial IP)
From: 44Net 44net-bounces+ronenp=hotmail.com@hamradio.ucsd.edu on behalf of Andrew Green andrew@andrewgreen.ca Sent: Friday, March 11, 2016 1:13 PM To: AMPRNet working group Subject: Re: [44net] ideas to uutomatic updates of gateway file to Cisco Routers ?
(Please trim inclusions from previous messages) _______________________________________________ Here’s my current config. NAT to 10.111.111.0/24 and to the Internet seems to work fine. It’s just when trying to traceroute to 44.135.16.1 (from AMPRnet) I can see the incoming packets on my 10.111.111.1 router but the Cisco never tries to reply.
http://pastebin.com/Z3CBXAdf http://pastebin.com/Z3CBXAdf
Thanks! Andrew VO1ABC
44Net mailing list 44Net@hamradio.ucsd.edu http://hamradio.ucsd.edu/mailman/listinfo/44net