It seems that you did something wrong in ufw, but generally you are much better off running shorewall as firewall as it is so much easier to configure.
Bob
On 2023-01-08 14:37, Kimberly Chase via 44net wrote:
Copy that. I went ahead and got one setup and it actually works, all devices are making use of the 44net IPs and they all have direct internet access for inbound and outbound traffic, but I ran into a problem... The second I issue the "ufw enable" commend to bring up my firewall, everything stops working, no more traffic flowing in either direction. What can I do to fix this? I'm not great at Linux networking, I'm still learning it.
On Sun, Jan 8, 2023, 6:27 AM Dan Cross crossd@gmail.com wrote:
On Sun, Jan 8, 2023 at 4:14 AM kj7omo--- via 44net <44net@mailman.ampr.org> wrote: > Hey y'all! I wanna set up a DHCP server on my gateway to hand my 44.x.x.x IPs to my various ham radio devices and provide them with internet access, as well as direct access to the outside world, allowing them to be accessed remotely via the 44.x.x.x IPs, is this possible? I don't see why you can't use a DHCP server locally, but there's a caveat in that, for the gateway at 44.0.0.1 to pass traffic, your addresses must have A (name) records in the ampr.org <http://ampr.org> DNS domain. This implies that the addresses handed out by DHCP are going to be relatively static (unless, I guess, you register a bunch of names in DNS in advance). BUT, if all you want is a central place to configure address information, then most DHCP servers can be configured to hand out static addresses to specific devices identified by MAC addresses. - Dan C. (KZ2X)
44net mailing list --44net@mailman.ampr.org To unsubscribe send an email to44net-leave@mailman.ampr.org