8 Jan
2019
8 Jan
'19
2:47 p.m.
Roger,
AMPRGW should be replaced with the IP of AMPRGW.See: http://wiki.ampr.org/wiki/Services
for those details.
You don't need a "Gateway" to the tunnel, as it's a Layer 3. You do need
to assign an IP from your range to a VLAN/bridge if you will make a: VLAN, port/ SSID,
etc. for your allocation to "live."
What issues are you having with network and firewall configs?You never actually said
what's wrong.
Feel free to ask me any more questions, or private email me for landline.
73,
- Lynwood
KB3VWG
-----Original Message-----
From: 44net-request <44net-request(a)mailman.ampr.org>
To: 44net <44net(a)mailman.ampr.org>
Sent: Tue, Jan 8, 2019 3:00 pm
Subject: 44Net Digest, Vol 8, Issue 3
Send 44Net mailing list submissions to
44net(a)mailman.ampr.org
To subscribe or unsubscribe via the World Wide Web, visit
https://mailman.ampr.org/mailman/listinfo/44net
or, via email, send a message with subject or body 'help' to
44net-request(a)mailman.ampr.org
You can reach the person managing the list at
44net-owner(a)mailman.ampr.org
When replying, please edit your Subject line so it is more specific
than "Re: Contents of 44Net digest..."
Today's Topics:
1. OpenWRT AMPRNet config (Roger)
----------------------------------------------------------------------
Message: 1
Date: Mon, 7 Jan 2019 12:32:53 -0800
From: Roger <va7lbb(a)rezgas.com>
To: 44net(a)mailman.ampr.org
Subject: [44net] OpenWRT AMPRNet config
Message-ID: <CC7E3091-3982-478B-A5C2-7F83E5D0AE30(a)rezgas.com>
Content-Type: text/plain; charset=utf-8
Hi,
I?m following the instructions at the below link to use OpenWRT as a 44Net gateway. I?m
confused about some of the instructions. What should <AMPRGW> be replace with in the
route.
This has me confused as well:
?an interface instance for a new VLAN and bridge (the example above uses AMPRNET), add it
to its own firewall zone using Input: Accept (if you wish for you AMPRLAN devices to reach
the router), Output: Accept and Forward: Drop (or Reject). Assign an IP from your
allocation to this interface, you will configure this IP on your devices as the Default
Route/Gateway address.?
I created the AMPRNET interface but i put the 44Net allocation ip in the gateway of that
interface, reboot after doing everything else, I get an error from Ampr-ripd that the
interface doesn?t exist.
If anyone has done this on a OpenWRT router, would you be willing to share your firewall
and network config files so that I can learn what I?m doing wrong.
http://wiki.ampr.org/wiki/Setting_up_a_gateway_on_OpenWRT
Thanks
Roger
VA7LBB
------------------------------
Subject: Digest Footer
_______________________________________________
44Net mailing list
44Net(a)mailman.ampr.org
https://mailman.ampr.org/mailman/listinfo/44net
------------------------------
End of 44Net Digest, Vol 8, Issue 3
***********************************