Roger,

AMPRGW should be replaced with the IP of AMPRGW.See: http://wiki.ampr.org/wiki/Services for those details.

You don't need a "Gateway" to the tunnel, as it's a Layer 3. You do need to assign an IP from your range to a VLAN/bridge if you will make a: VLAN, port/ SSID, etc. for your allocation to "live." What issues are you having with network and firewall configs?You never actually said what's wrong.

Feel free to ask me any more questions, or private email me for landline.

73,

- Lynwood KB3VWG

-----Original Message----- From: 44net-request 44net-request@mailman.ampr.org To: 44net 44net@mailman.ampr.org Sent: Tue, Jan 8, 2019 3:00 pm Subject: 44Net Digest, Vol 8, Issue 3

Send 44Net mailing list submissions to     44net@mailman.ampr.org

To subscribe or unsubscribe via the World Wide Web, visit     https://mailman.ampr.org/mailman/listinfo/44net or, via email, send a message with subject or body 'help' to     44net-request@mailman.ampr.org

You can reach the person managing the list at     44net-owner@mailman.ampr.org

When replying, please edit your Subject line so it is more specific than "Re: Contents of 44Net digest..."

Today's Topics:

1. OpenWRT AMPRNet config (Roger)

----------------------------------------------------------------------

Message: 1 Date: Mon, 7 Jan 2019 12:32:53 -0800 From: Roger va7lbb@rezgas.com To: 44net@mailman.ampr.org Subject: [44net] OpenWRT AMPRNet config Message-ID: CC7E3091-3982-478B-A5C2-7F83E5D0AE30@rezgas.com Content-Type: text/plain;    charset=utf-8

Hi, I?m following the instructions at the below link to use OpenWRT as a 44Net gateway. I?m confused about some of the instructions. What should <AMPRGW> be replace with in the route.

This has me confused as well: ?an interface instance for a new VLAN and bridge (the example above uses AMPRNET), add it to its own firewall zone using Input: Accept (if you wish for you AMPRLAN devices to reach the router), Output: Accept and Forward: Drop (or Reject). Assign an IP from your allocation to this interface, you will configure this IP on your devices as the Default Route/Gateway address.? I created the AMPRNET interface but i put the 44Net allocation ip in the gateway of that interface, reboot after doing everything else, I get an error from Ampr-ripd that the interface doesn?t exist. If anyone has done this on a OpenWRT router, would you be willing to share your firewall and network config files so that I can learn what I?m doing wrong. http://wiki.ampr.org/wiki/Setting_up_a_gateway_on_OpenWRT

Thanks Roger VA7LBB

------------------------------

Subject: Digest Footer

_______________________________________________ 44Net mailing list 44Net@mailman.ampr.org https://mailman.ampr.org/mailman/listinfo/44net

------------------------------

End of 44Net Digest, Vol 8, Issue 3 ***********************************