Hi Chris,
The -i parameter has to point to the IPIP tunnel interface as defined in the previous step for the password search to work. The script uses 'ampr0' as an example according to the example setup in the ampr-ripd package. This has to be adapted to your local setup (e.g. if you use tunl0).
Marius, YO2LOJ
The next step, according to the guide, is to run ./find_pass.sh but when I do that I get the error:
Tunnel socket: Setting SO_BINDTODEVICE: No such device
I took a look at the contents of the find_pass.sh file and it seems to contain the command ./ampr-ripd -d -i ampr0 so I decided to run ./ampr-ripd -d -i eth0 from the command line and I get the message:
Waiting for RIPv2 broadcasts...
but it never prints out the "secret" password. I am running Debian Jessie as my OS and have registered a gateway on the ampr portal. Just wondering if there's something obvious I'm missing here?
Cheers, Chris VE7ALB in Victoria BC||||