3 Mar
2020
3 Mar
'20
3:05 p.m.
HI Tracy,
Same here. If you are lucky enough to document the steps, I would appreciate it.
I have a EdgerouterX as well and would like to get it working.
Angelo
---------------------------------------------------------
If you don't ask, you will never know!!
________________________________
From: 44Net <44net-bounces+n5uxt=hotmail.com(a)mailman.ampr.org> on behalf of Tracy
Markham via 44Net <44net(a)mailman.ampr.org>
Sent: Saturday, February 22, 2020 8:40 PM
To: AMPRNet working group <44net(a)mailman.ampr.org>
Cc: Tracy Markham <n4lgh(a)147120.net>
Subject: Re: [44net] GL.iNet openWRT Rip44 support?
My poor choice of words - but the dependencies are all there as far as the
software is concerned. Of course there is config...
I've tried the wiki at the link you noted several times with no avail -
probably because of my lack of network skill.
If you feel like giving a novice (at this, I've done a lot of SOHO basic
networks) step by step for my allocation, I'd send you a digital beverage
for sure! I really want to learn the GL setup, but if I could get the
EdgerouterX actually running that would be a treat.
Tracy N4LGH
n4lgh -at- 147120.net
On Sat, Feb 22, 2020 at 12:14 PM Marius Petrescu via 44Net <
44net(a)mailman.ampr.org> wrote:
Tracy,
you will never have an 'one click' solution for this, since the setup
needs to be personalized for every gateway.
Have you actually tried to follow the wiki for setting up a gateway on a
EdgerouterX?
It is as close at it can get to a single click option.
http://wiki.ampr.org/wiki/Installing_ampr-ripd_on_a_Ubiquiti_EdgeRouter_or_…
Marius, YO2LOJ
On 11.02.2020 17:40, Tracy Markham via 44Net wrote:
_________________________________________
44Net mailing list
44Net(a)mailman.ampr.org
https://mailman.ampr.org/mailman/listinfo/44net
I had reached out to the good people at GL.iNet
and asked for help
getting
one of their openWRT routers to run my 44 net
assignment. I referred them
to the page explaining openWRT setup (
wiki.ampr.org/wiki/Setting_up_a_gateway_on_OpenWRT) and requested they
compile an executable for the processor in the router.
Apparently they did it. It will be a bit before I can try to configure
it
but its a one click installation. It's
available to anyone with a GL.iNet
router product, just navigate to Applications -> Plugins and Update, then
navigate to the R section. I have a screencap of all the dependencies it
installed if anyone is interested.
I reached out to them because I've failed on my previous attempts to set
up
an EdgerouterX for my assignment... I am by no
means a network engineer,
this is my foray into getting a gateway going. If anyone could confirm
this
works that would be great. If you're willing
to help me get mine going
that
would be even better.
Tracy N4LGH
_________________________________________
44Net mailing list
44Net(a)mailman.ampr.org
https://mailman.ampr.org/mailman/listinfo/44net
_________________________________________
44Net mailing list
44Net(a)mailman.ampr.org
https://mailman.ampr.org/mailman/listinfo/44net