When you say, "absolutely not experienced about radio transmission/devices/requirements", I take it that you are not an amateur radio operator.
Amateur radio frequencies and the AMPRnet are for use only by licensed amateur radio operators in accordance with their local country's laws for the amateur radio service. I don't know the laws in Bangladesh, but it's likely that, unless there were a licensed operator present in the remote village you mention, it would not be a legal solution.
Also, amateur radio in the US and everywhere else that I'm aware of does not allow encryption. But most of the internet is moving toward encryption: websites, email, etc. So, accessing those resources via amateur radio would be illegal.
Lastly, speed is an issue. Browsing today's websites requires a lot of speed, something that just doesn't work over 1200 baud or 9600 baud or even 56 kbps (which is coming, but not even available yet). You could go faster in the microwave frequencies, but then distance and line of sight are an issue and you still need a licensed operator and no encryption.
Bottom line, amateur radio is probably not a viable solution for your application.
Michael N6MEF
On Tue, Jan 03, 2017 at 12:39:28PM +0100, Alessandro Spinella wrote:
(Please trim inclusions from previous messages) _______________________________________________ hello everybody,
let me shortly present myself and the matter: working in IT for more
than 30 years, experienced with network devices (switch, routers, firewalls, IDS/IPS), programming (C and some others), good knowledge on protocols and RFCs; hosts under my control are not allowed to run anything else than FreeBSD.
but absolutely not experienced about radio
transmission/devices/requirements so had carefully read http://wiki.ampr.org/wiki/Quickstart and feel it is not suitable for my problem: I am looking how to arrange for an internet-connected PC located somewhere in a remote village of Bangladesh with no local power source.
while it seem almost easy to power the PC with solar-cells battery is it
not clear for me:
- if and how is possible to use 44net to internet-connect the remote
site via RF, feel it just a matter to have sufficient "radio power" to reach a 44net bridge, a PC/router and some radio devices but unsure.
- what kind of radio devices are suitable for that use (or: how far can
radio waves go with a "poor" power source?)
- locations (if any) of local-radio-amateur joined in 44net that can
bridge some internet traffic from/to such a "leaf-site"
moreover my limit are:
- money: while it's a personal initiative have no founding except my
incoming and thus cheap is a must
- reliability: can't be on site to fix any possible problem as them
arise, so "good" devices are required
as stated in RFC1925 : <<good, fast, cheap: choose two, you can't have
all three>> implies that am aware that "fast" can't be get; just need directions and some "good" reference for the HW where I can learn details as power requirements and for the SW (but I guess 44net is the right place).
wish you nice day
$witch _________________________________________ 44Net mailing list 44Net@hamradio.ucsd.edu http://hamradio.ucsd.edu/mailman/listinfo/44net
44Net mailing list 44Net@hamradio.ucsd.edu http://hamradio.ucsd.edu/mailman/listinfo/44net