Hi Marius, I have a few question and I will ask them in line
1. Add tunnel interface
- Config Tree → add tun44 → Update List
- tun44:
address: <your AMPR gw address>*/32* My allocation is 44.135.51.0/26 So From what you are telling here I should use: 44.135.51.0/32 ??
description: AMPR GW
encapsulation: ipip
local-ip: <your public gw IP> Is that the IP adress that my ISP provide me? or is it the IP adress that I want to show to the internet? like 44.135.51.1 in my case??
remote-ip: *0.0.0.0*
- Press Preview ans Apply
THanks!!
Pierre VE2PF
________________________________ De : 44Net 44net-bounces+petem001=hotmail.com@mailman.ampr.org de la part de Marius Petrescu marius@yo2loj.ro Envoyé : 27 février 2019 03:03 À : 44net@mailman.ampr.org Objet : [44net] Update: EdgeRouter Lite (and probably others) full tunnel setup
Hi everyone,
I updated the instructions for setting up an EdgeRouter as a full AMPR gateway.
1. Add tunnel interface
- Config Tree → add tun44 → Update List
- tun44:
address: <your AMPR gw address>*/32*
description: AMPR GW
encapsulation: ipip
local-ip: <your public gw IP>
remote-ip: *0.0.0.0*
- Press Preview ans Apply
2. Download your packages from here:
Find the EdgeRouter setup package here: http://www.yo2loj.ro/hamprojects/Ampr_EdgeRouter.tgzhttp://www.yo2loj.ro/hamprojects/Ampr_EdgeRouter.tgz (mips64) For the EdgeRouterX setup use this one: http://www.yo2loj.ro/hamprojects/Ampr_EdgeRouterX.tgz (mipsel)
Inside those archives, there is a setup.txt file explaining the next steps.
NOTE: THE SETUP SCRIPT DOES NOT SECURE YOUR ROUTER. YOU NEED TO SET UP FIREWALL ROUTES YOURSELF.
3. Optionally you can install a status page in the wizzard section.
Download here: http://www.yo2loj.ro/hamprojects/Ampr_Status_Wizard.tar
I hope this is useful,
Marius, YO2LOJ
_________________________________________ 44Net mailing list 44Net@mailman.ampr.org https://mailman.ampr.org/mailman/listinfo/44net