5 Apr
2020
5 Apr
'20
9:25 p.m.
Hi Keith,
You need to place your 44.18.50.1/24 (interface IP and network mask) if
you choose that address for the router. It could also be e.g.
44.18.50.14/24, so you can keep the 44.18.50.1 ip for services on some
other machine.
The route will appear after the commit command.
Marius, YO2LOJ
On 06.04.2020 03:55, Keith Kasin via 44Net wrote:
Greetings,
I am trying to set up my Edgerouter 10x as a gateway. When I get to the step
ubnt@ubnt:~$ set interfaces ethernet eth0 address <put your AMPRNet network
assignment>
I enter my allocation 44.18.50.0/28 and get an error. I can set 44.18.50.1/28 or just
44.18.50.1 however this does not yield a route when I enter the “show ip route” command.
Should I be using my broadcast address, 44.18.50.15 in this position? I am sorry if I
sound dense here so any guidance is appreciated as I work my way through this set up.
Thank you,
Keith AI6BX
_________________________________________
44Net mailing list
44Net(a)mailman.ampr.org
https://mailman.ampr.org/mailman/listinfo/44net