[44net] New to 44Net with some rookie questions

Hello, Just got started on AMPR 44Net.  Currently I have a /28 block and using Raspberry Pi 4 as my IPIP gateway at home OTH.    My set up is Verizon FiOS > Verizon Router (for all none Ham stuffs) > DMZ from Verizon router to 192.xx.xx.144 (my Raspberry Pi gateway). Raspberry eth0 is 44.xx.xx.1 as gateway and eth1 is 44.xx.xx.14 as tunl0 for my Ham stuffs.   My eth1 is connected to a 16 ports Ethernet switch to supply the connections to all my Ham stuffs. So far everything is working well.  I was able to request an IP in the range of 44.xx.xx.2 – 44.xx.xx.13 no problem.  Later a friend will help me setting up a Mikrotik router, I just had to order one first.  For right now Raspberry pi is what I will be using. I have some questions that I was not sure or could not really find the answer to specific questions. Can I move my gateway over to VPS somewhere?  Or the VPS setup is for the larger block not for individual home use. If I could do this using VPS then I could rent one up, no problem.  I would also need some sort of the instruction or guidance on how to set this up using VPS service instead of a Raspberry Pi at home QTH. The instruction I found is more like the set up for /24 BPG type of thing.  I do not have a use for that many IP addresses. Another question is I have 2 blocks of addresses, obviously they were on a different subnet.  Could I use one Raspberry Pi gateway, one gateway address?  If that is possible, how do I add the 2nd block of IP range to my existing Raspberry Pi gateway setup or later on Mikrotik box? 73, Kit W3KIT/ HS0ZOE    Sent from Yahoo Mail on Android