The config you send me works. Now I need to figure out how to actually run ampr-ripd
When I try to get the password
./ampr-ripd -d -v -I ampr0
Tunnel socket: Setting SO_BINDTODEVICE: No such device
Kun ________________________________ From: Scott Nicholas scott.nicholas@scottn.us Sent: Monday, September 16, 2019 16:49 To: KUN LIN dnwk@linkun.info Cc: AMPRNet working group 44net@mailman.ampr.org Subject: Re: [44net] need help configure gateway on ubuntu
Could you describe your interfaces then? If you have just ens3 for ham and lan subnets then the easiest way to add an IP using the Debian/Ubuntu interfaces file would be:
auto ens3:1 iface ens3:1 inet static address {my allocated IP} netmask 255.255.255.252
On Mon, Sep 16, 2019, 7:42 PM KUN LIN <dnwk@linkun.infomailto:dnwk@linkun.info> wrote:
ens4 is not a physical devices. It is latched onto ens3 as a virtual device.
I tried to put ens4 on both lines and got error “Cannot find device "ens4"”
Kun
________________________________ From: Scott Nicholas <scott.nicholas@scottn.usmailto:scott.nicholas@scottn.us> Sent: Monday, September 16, 2019 4:33:20 PM To: AMPRNet working group <44net@mailman.ampr.orgmailto:44net@mailman.ampr.org> Cc: KUN LIN <dnwk@linkun.infomailto:dnwk@linkun.info> Subject: Re: [44net] need help configure gateway on ubuntu
If this is verbatim then the issue is that you used ens4 in one line and ens3 in another.
Regards, Scott
On Mon, Sep 16, 2019, 5:54 PM KUN LIN via 44Net <44net@mailman.ampr.orgmailto:44net@mailman.ampr.org> wrote: I am trying to configure the tunnel on Ubuntu 18 on a cloud VM just to figure out how the configuration works. I am looking at http://wiki.ampr.org/wiki/Ubuntu_Linux_Gateway_Examplehttps://eur02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwiki.ampr.org%2Fwiki%2FUbuntu_Linux_Gateway_Example&data=02%7C01%7C%7C2e65325dabf54311cb1008d73afe4a93%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637042736154177364&sdata=A691nu5dXTfwFVteUGA3erMXMs4ufPfCOcHUgS%2Bp414%3D&reserved=0 and have trouble configure the interface. I have configure
auto ens4
iface ens3 inet static
address {my allocated IP}
netmask 255.255.255.252
However, the ifup ens4 command will failed to bring up ens4 interface. And of course when running ampr-run.sh and find_pass.sh will resulted in Setting SO_BINDTODEVICE: No such device.
Any advices on how to set it up on Ubuntu 18?
Thanks
Kun
_________________________________________ 44Net mailing list 44Net@mailman.ampr.orgmailto:44Net@mailman.ampr.org https://mailman.ampr.org/mailman/listinfo/44nethttps://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fmailman.ampr.org%2Fmailman%2Flistinfo%2F44net&data=02%7C01%7C%7C2e65325dabf54311cb1008d73afe4a93%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637042736154187369&sdata=mStShlnxi%2FIf%2FQCsxYOnay1%2BBBYxPmatrdvHK6MQvCo%3D&reserved=0