Yes, but only AFTER the change, since the RIP broadcasts and the incoming internet connections are still via the old gateway.
(It could be fixed to work in the current config, but the change is quite big, and will have to be undone after the new config is working)
On 27.05.2017 00:11, R P wrote:
(Please trim inclusions from previous messages) _______________________________________________ What do i need to do in my MikroTik ?
Just to change the Destination of the tunnel ?
From: 44Net 44net-bounces+ronenp=hotmail.com@hamradio.ucsd.edu on behalf of Brian Kantor Brian@UCSD.Edu Sent: Friday, May 26, 2017 11:28 AM To: 44net@hamradio.ucsd.edu Subject: Re: [44net] Good News! and some changes coming
(Please trim inclusions from previous messages) _______________________________________________ I've installed the routing software on the new amprgw machine and tested it, and it's working properly. In anticipation of moving the inbound route for 44/8 from the old amprgw to the new one, it is time for people to start using the AMPRGW.UCSD.EDU (169.228.34.84) address for their outgoing tunnel endpoint.