I had same problem...make sure the tunnel to UCSD has the correct endpoint that should fix it.
I also created a address list with 44.0.0.1 and 44.0.0.2 in it and used that as the source instead of 44.0.0.1 in the firewall filter as Ruben suggests.
Leon
On 6/6/2017 8:17 AM, Ruben ON3RVH wrote:
Jacek,
Check your routing table. There probably is a route to 44.0.0.1 & 44.0.0.2 in your routing table pointing towards IPIP interfaces. Delete those routes and interfaces and insert 44.0.0.1 & 44.0.0.2 in the filters for RIP with action reject or ignore. That should fix everything and your RIP table will be populated again after 5 min orso and you should be golden.
If you need the exact commands for the RIP filters, let me know and I'll forward them once I get home tonight.
Ruben - ON3RVH
On 6 Jun 2017, at 14:08, Jacek Grzona sp2gch@gmail.com wrote:
Hello. Is there any probel for a few days with yo2loj script? For a few days I receive such a return in the logs of the mikrotik "Jun / 06/2017 13:21:00 script, error AMPR: To few RIP entries available" Regards SP2GCH