Hello,I am having an issue with the routes script for the Mikrotik routers. I got through all the steps to get RIP working and routes began populating based of the guides here: http://wiki.ampr.org/wiki/Setting_up_a_gateway_on_MikroTik_Routers%C2%A0. Then I got the latest script from http://www.yo2loj.ro/%C2%A0version 3.1, while ssh'd into the box I copied and pasted the script http://www.yo2loj.ro/hamprojects/ampr-gw-3.1.rsc%C2%A0into the terminal. I used my public IP address in the AmprPublicIp field and my AMPRnet IP assigned to the DMZ IP address 44.68.204.1 then ran the update_amprgw script. At first I thought it was working but not all of the routes appear to be populating. I am only seeing 55 interfaces, much less than the 400+ I would expect. Any advise on this issue?ThanksMark ScranoK2EXE