Very good policy Lynwood!
Part of my config: --
/ip route add distance=1 dst-address=44.0.0.0/8 gateway=ucsd-gw pref-src=44.144.48.1 routing-mark=44rip add distance=2 gateway=194.50.91.30 pref-src=194.50.91.2 add comment="Added on 2017/06/06 17:30:14" distance=50 dst-address=44.2.2.0/24 gateway=ampr-216.218.207.198 pref-src=44.144.48.1 add comment="Added on 2017/06/06 17:30:14" distance=50 dst-address=44.2.7.0/30 gateway=ampr-73.185.12.233 pref-src=44.144.48.1 ....
/interface ipip add allow-fast-path=no disabled=yes !keepalive local-address=194.50.91.2 name=OLD_UCS_GW remote-address=169.228.66.251 add comment="Added on 2017/06/06 17:30:14" !keepalive local-address=194.50.91.2 name=ampr-216.218.207.198 remote-address=216.218.207.198 add comment="Added on 2017/06/06 17:30:14" !keepalive local-address=194.50.91.2 name=ampr-73.185.12.233 remote-address=73.185.12.233
--
That's about it for the IPIP tunnel and route towards it. There is also a dynamic route for those subnets, but those get advertised by RIP as you well know. But I omitted that part of the config as the script will go through all RIP routes and create a tunnel for each RIP route and a static route towards that IPIP tunnel.
73,
Ruben - ON3RVH
-----Original Message----- From: 44Net [mailto:44net-bounces+on3rvh=on3rvh.be@hamradio.ucsd.edu] On Behalf Of lleachii--- via 44Net Sent: woensdag 7 juni 2017 16:06 To: 44net@hamradio.ucsd.edu Cc: lleachii@aol.com Subject: Re: [44net] Mikrotik
Leon,
Thanks, I am trying to borrow a Mikrotik from a friend to understand the subnet-linked-to-tunnel thing more clearly.
I do indeed want to review Marius' scripts; but I wanted to do some research myself - prior.
Just as our good friend suggested, I don't want to run a script I don't yet understand.
73,
- Lynwood KB3VWG
Lynwood--if you are using a mikrotik device, then the solution is to use Marius' solution of scripts that work 100%
_________________________________________ 44Net mailing list 44Net@hamradio.ucsd.edu http://hamradio.ucsd.edu/mailman/listinfo/44net