Hi everyone,
I updated the instructions for setting up an EdgeRouter as a full AMPR gateway.
1. Add tunnel interface
- Config Tree → add tun44 → Update List
- tun44:
address: <your AMPR gw address>*/32*
description: AMPR GW
encapsulation: ipip
local-ip: <your public gw IP>
remote-ip: *0.0.0.0*
- Press Preview ans Apply
2. Download your packages from here:
Find the EdgeRouter setup package here: http://www.yo2loj.ro/hamprojects/Ampr_EdgeRouter.tgzhttp://www.yo2loj.ro/hamprojects/Ampr_EdgeRouter.tgz (mips64) For the EdgeRouterX setup use this one: http://www.yo2loj.ro/hamprojects/Ampr_EdgeRouterX.tgz (mipsel)
Inside those archives, there is a setup.txt file explaining the next steps.
NOTE: THE SETUP SCRIPT DOES NOT SECURE YOUR ROUTER. YOU NEED TO SET UP FIREWALL ROUTES YOURSELF.
3. Optionally you can install a status page in the wizzard section.
Download here: http://www.yo2loj.ro/hamprojects/Ampr_Status_Wizard.tar
I hope this is useful,
Marius, YO2LOJ