The content should be the same, it's built from the same data by the same program.
I've turned on the RIP sender on the new gateway. It runs 3 seconds after the 5-minute marks so as not to stomp on the old gateway which sends right on the mark.
Let me know if there are any problems. It's easy to turn it off again if needed, it just runs out of crontab. - Brian
On Sat, May 27, 2017 at 01:42:28AM +0300, Marius Petrescu wrote:
No issues with turning them on as long as the RIP content is the same...
For the mikrotiks and possible others using individual tunnels , they can be switched only if you DO turn on the new sender, since they have defined tunnel endpoints and do not "cross-listen" for RIP.
Amprd was designed from the beginning to update its default route according to the gateway of 44.0.0.1 automatically, so it will expect a 44.0.0.1 via 169.228.34.84 and use the new one without any intervention.
I assumed this could happen some day so there is no hard coded reference for the gateway IP in any of the tools.
Sorry for the late response.
Marius, YO2LOJ