23 Mar
2016
23 Mar
'16
3:20 p.m.
Hi Pedja
All this 10.0.0.0 stuff is "old stuff" from todays view.
Use ircDDBgateway and register to the yahoo groups for help
https://groups.yahoo.com/neo/groups/ircDDBGateway/info
But you need a full featured internet access. Otherwise you cannot
connect to every repeater or reflector.
If you gateway only has access to 44.0.0.0 IPs, then you need to setup a
tunnel to a host which has both, ampr net and the complete internet and
do NAT and portforwarding.
I did all this on DB0DLR 1,5 years ago. It'S not difficult.
Greetings
Micha, DD2MIC
Am 23.03.2016 um 09:00 schrieb Pedja YT9TP:
(Please trim inclusions from previous messages)
_______________________________________________
We are planing on setting up D-Star gateway, so I am reading all I can
about it.
Here is exception form one tutorial regarding this:
"The router for the D-STAR gateway must support a LAN address of
10.0.0.1, with a full class ‘A’ LAN (subnet mask of 255.0.0.0)."
Is it just me or this is really strange to force this IP range which
will conflict with number of private networks, especially when there is
44net dedicated for ham radio use?
Pedja
YT9TP
_________________________________________
44Net mailing list
44Net(a)hamradio.ucsd.edu
http://hamradio.ucsd.edu/mailman/listinfo/44net
--
Beste Grüße von
Micha