We are planing on setting up D-Star gateway, so I am reading all I can about it.
Here is exception form one tutorial regarding this:
"The router for the D-STAR gateway must support a LAN address of 10.0.0.1, with a full class ‘A’ LAN (subnet mask of 255.0.0.0)."
Is it just me or this is really strange to force this IP range which will conflict with number of private networks, especially when there is 44net dedicated for ham radio use?
Pedja YT9TP
Actually not. This is the local IP setting of the gateway. It expects to be connected to a router with 10.0.0.1/8 witch will NAT to the Internet. In other words, the D-STAR device has a default route via 10.0.0.1, that's all. No conflicts here.
Marius, YO2LOJ
-----Original Message----- From: Pedja YT9TP Sent: Wednesday, March 23, 2016 10:00 To: AMPRNet working group Subject: [44net] D-Star
(Please trim inclusions from previous messages) _______________________________________________
We are planing on setting up D-Star gateway, so I am reading all I can about it.
Here is exception form one tutorial regarding this:
"The router for the D-STAR gateway must support a LAN address of 10.0.0.1, with a full class ‘A’ LAN (subnet mask of 255.0.0.0)."
Is it just me or this is really strange to force this IP range which will conflict with number of private networks, especially when there is 44net dedicated for ham radio use?
Pedja YT9TP
_________________________________________ 44Net mailing list 44Net@hamradio.ucsd.edu http://hamradio.ucsd.edu/mailman/listinfo/44net
On 23.3.2016. 09:14, Marius Petrescu wrote:
Actually not. This is the local IP setting of the gateway. It expects to be connected to a router with 10.0.0.1/8 witch will NAT to the Internet. In other words, the D-STAR device has a default route via 10.0.0.1, that's all. No conflicts here.
Probably if you do not use that LAN for anything else.
I have two LANs that I could use to set D-star note. Both use this IP range making this a conflict and I cannot reconfigure.
Third network I could use may be reconfigured to arbitrary IP range, but router there does not support setting /8 network. And replacing router is not an option.
I hate those easy shortcut solutions set without thinking first.
Pedja YT9TP
Yes, you are right. It is just easier to have a fixed pre-set than to deal with network settings or even with a DHCP client.
-----Original Message----- From: Pedja YT9TP Sent: Wednesday, March 23, 2016 12:16 To: AMPRNet working group Subject: Re: [44net] D-Star
...
Probably if you do not use that LAN for anything else.
...
I hate those easy shortcut solutions set without thinking first.
Pedja YT9TP
Hi Pedja All this 10.0.0.0 stuff is "old stuff" from todays view.
Use ircDDBgateway and register to the yahoo groups for help https://groups.yahoo.com/neo/groups/ircDDBGateway/info
But you need a full featured internet access. Otherwise you cannot connect to every repeater or reflector. If you gateway only has access to 44.0.0.0 IPs, then you need to setup a tunnel to a host which has both, ampr net and the complete internet and do NAT and portforwarding.
I did all this on DB0DLR 1,5 years ago. It'S not difficult.
Greetings Micha, DD2MIC
Am 23.03.2016 um 09:00 schrieb Pedja YT9TP:
(Please trim inclusions from previous messages) _______________________________________________
We are planing on setting up D-Star gateway, so I am reading all I can about it.
Here is exception form one tutorial regarding this:
"The router for the D-STAR gateway must support a LAN address of 10.0.0.1, with a full class ‘A’ LAN (subnet mask of 255.0.0.0)."
Is it just me or this is really strange to force this IP range which will conflict with number of private networks, especially when there is 44net dedicated for ham radio use?
Pedja YT9TP
44Net mailing list 44Net@hamradio.ucsd.edu http://hamradio.ucsd.edu/mailman/listinfo/44net
Or have a BGP'ed 44-net subnet. Some repeaters are connecting to various networks in that manner.
On Wed, Mar 23, 2016 at 12:20 PM, Micha Przybilla micha@dd2mic.de wrote:
(Please trim inclusions from previous messages) _______________________________________________ Hi Pedja All this 10.0.0.0 stuff is "old stuff" from todays view.
Use ircDDBgateway and register to the yahoo groups for help https://groups.yahoo.com/neo/groups/ircDDBGateway/info
But you need a full featured internet access. Otherwise you cannot connect to every repeater or reflector. If you gateway only has access to 44.0.0.0 IPs, then you need to setup a tunnel to a host which has both, ampr net and the complete internet and do NAT and portforwarding.
I did all this on DB0DLR 1,5 years ago. It'S not difficult.
Greetings Micha, DD2MIC
Am 23.03.2016 um 09:00 schrieb Pedja YT9TP:
(Please trim inclusions from previous messages) _______________________________________________
We are planing on setting up D-Star gateway, so I am reading all I can about it.
Here is exception form one tutorial regarding this:
"The router for the D-STAR gateway must support a LAN address of 10.0.0.1, with a full class ‘A’ LAN (subnet mask of 255.0.0.0)."
Is it just me or this is really strange to force this IP range which will conflict with number of private networks, especially when there is 44net dedicated for ham radio use?
Pedja YT9TP
44Net mailing list 44Net@hamradio.ucsd.edu http://hamradio.ucsd.edu/mailman/listinfo/44net
-- Beste Grüße von Micha _________________________________________ 44Net mailing list 44Net@hamradio.ucsd.edu http://hamradio.ucsd.edu/mailman/listinfo/44net
-
K7VE - John -
Marius Petrescu -
Micha Przybilla -
Pedja YT9TP