There are no IPv6 ampr adresses. I just have a IPv4/IPv6 dual stack setup. That's all. The ampr part is just a small part in the system. It is not exclusively ampr dedicated.
I talked about netrom because I use nerom to connect to remote nodes and then try to ping you from those nodes... Usually a node allows ping and telnet using its gatewaying setup.
Marius, YO@LOJ
-----Original Message----- From: 44net-bounces+marius=yo2loj.ro@hamradio.ucsd.edu [mailto:44net-bounces+marius=yo2loj.ro@hamradio.ucsd.edu] On Behalf Of lleachii@aol.com Sent: Wednesday, March 27, 2013 23:51 To: 44net@hamradio.ucsd.edu Subject: Re: [44net] Newbie issue
(Please trim inclusions from previous messages) _______________________________________________ Well, it becomes difficult to troubleshoot if other stations will not assist. Thanks Bob, you are the first station since I last tested that also noted an inability to ping me.
Marius, the reason I asked is because the last time I tested, it was determined some stations were using other protocols and simply saying "I can't ping you." You then mentioned these were NetRom connections. I am left to assume that you ARE using ICMP Echo Request over IPv4 unless you confirmed.
The reason I am asking what Network OS is being used is to make a list of all stations I have attempted to ping, and compare their NOS to the list of problems or reported lack of connectivity to my station. I was trying to determine if you are using Debian or some other network software.
Not every station uses the same software suite or Operating System, just as you mentioned "full-fledged" means something different to all stations. In fact, I am now curious about AMPR IPv6 allocations, I did not know they were available.
73,
Lynwood
_________________________________________ 44Net mailing list 44Net@hamradio.ucsd.edu http://hamradio.ucsd.edu/mailman/listinfo/44net http://www.ampr.org/donate.html