The tables will populate all right. The problem is they will clear after 3 minutes if I remember correctly, and not persist to the next 5 min update period, screwing up the whole concept behind the script about maintaining the individual dynamic generated tunnels and routes. I haven't checked the latest ROS7 versions, but that was the main reason why a porting of the scripts to ROS7 was not possible. On 20/09/2023 03:23, KUN LIN via 44net wrote:

Hi Marius, I think it should be able to work in v7: (have not tested it myself) https://help.mikrotik.com/docs/display/ROS/RIP Sub-menu: /routing rip instance route-timeout (Default: ) route timeout update-interval (time; Default: ) specifies time interval after which the route is considered invalid 73 Ruben ON3RVH From: Marius Petrescu via 44net &lt;44net(a)mailman.ampr.org&gt; Sent: Wednesday, September 20, 2023 02:30 To: AMPRNet working group &lt;44net(a)mailman.ampr.org&gt; Subject: [44net] Re: IPIP tunnel for Mikrotik The tables will populate all right. The problem is they will clear after 3 minutes if I remember correctly, and not persist to the next 5 min update period, screwing up the whole concept behind the script about maintaining the individual dynamic generated tunnels and routes. I haven't checked the latest ROS7 versions, but that was the main reason why a porting of the scripts to ROS7 was not possible. On 20/09/2023 03:23, KUN LIN via 44net wrote: It looks like my Mikrotik’s routing table did updated with all the 44 routes eventhough I only configured a RIP but no script? I don’t know how to verify if those routes actually working. Kun From: Marius Petrescu via 44net<mailto:44net@mailman.ampr.org> Sent: Monday, September 18, 2023 11:03 AM To: AMPRNet working group<mailto:44net@mailman.ampr.org> Subject: [44net] Re: IPIP tunnel for Mikrotik No, it is not possible for now. The expiry timers for RIP in ROS7 can not be adjusted to fit our purposes (i.e. period 5min instead of 20sec, expiry 15min instead of 1 min). If this will ever be fixed is unknown, since very few people use RIP, let alone adjust the timers. On 18/09/2023 20:43, KUN LIN via 44net wrote: Oh, I am on ROS7/CHR. Is there a way to get it work on ROS7? Kun From: Marius Petrescu via 44net <44net@mailman.ampr.org><mailto:44net@mailman.ampr.org> Sent: Monday, September 18, 2023 9:18 To: 44net@mailman.ampr.org<mailto:44net@mailman.ampr.org> <44net@mailman.ampr.org><mailto:44net@mailman.ampr.org> Subject: [44net] Re: IPIP tunnel for Mikrotik The v3.1 scripts are for ROS up to 6.40, and the v3.2 scripts from ROS 6.41 up to the latest v6 releases. The scripts do NOT work on ROS 7 due to the fact that the RIP handling changed and the RIP timers do not work correctly. Marius, YO2LOJ On 18/09/2023 18:01, KUN LIN via 44net wrote: Hi Has anyone setup the IPIP tunnel successfully in Mikrotik? I think the instruction in Wiki is written for ROS 2.0. Things has changed a lot and I have trouble following. I created the IPIP tunnel in the interface and not sure what to do next. I added my IP subnet to the IP tab. The RIP configuration menu is very different now. Kun _______________________________________________ 44net mailing list -- 44net@mailman.ampr.org<mailto:44net@mailman.ampr.org> To unsubscribe send an email to 44net-leave@mailman.ampr.org<mailto:44net-leave@mailman.ampr.org> _______________________________________________ 44net mailing list -- 44net@mailman.ampr.org<mailto:44net@mailman.ampr.org> To unsubscribe send an email to 44net-leave@mailman.ampr.org<mailto:44net-leave@mailman.ampr.org> _______________________________________________ 44net mailing list -- 44net@mailman.ampr.org<mailto:44net@mailman.ampr.org> To unsubscribe send an email to 44net-leave@mailman.ampr.org<mailto:44net-leave@mailman.ampr.org>

How do I test those parameters? There are a lot of version updates. Kun From: Marius Petrescu via 44net<mailto:44net@mailman.ampr.org> Sent: Wednesday, September 20, 2023 12:18 AM To: 44net@mailman.ampr.org<mailto:44net@mailman.ampr.org> Subject: [44net] Re: IPIP tunnel for Mikrotik I have, it doesn't. The timing parameters simply get ignored. On 20/09/2023 10:15, Ruben ON3RVH via 44net wrote: Hi Marius, I think it should be able to work in v7: (have not tested it myself) https://help.mikrotik.com/docs/display/ROS/RIP Sub-menu: /routing rip instance route-timeout (Default: ) route timeout update-interval (time; Default: ) specifies time interval after which the route is considered invalid 73 Ruben ON3RVH From: Marius Petrescu via 44net <44net@mailman.ampr.org><mailto:44net@mailman.ampr.org> Sent: Wednesday, September 20, 2023 02:30 To: AMPRNet working group <44net@mailman.ampr.org><mailto:44net@mailman.ampr.org> Subject: [44net] Re: IPIP tunnel for Mikrotik The tables will populate all right. The problem is they will clear after 3 minutes if I remember correctly, and not persist to the next 5 min update period, screwing up the whole concept behind the script about maintaining the individual dynamic generated tunnels and routes. I haven't checked the latest ROS7 versions, but that was the main reason why a porting of the scripts to ROS7 was not possible. On 20/09/2023 03:23, KUN LIN via 44net wrote: It looks like my Mikrotik’s routing table did updated with all the 44 routes eventhough I only configured a RIP but no script? I don’t know how to verify if those routes actually working. Kun From: Marius Petrescu via 44net<mailto:44net@mailman.ampr.org> Sent: Monday, September 18, 2023 11:03 AM To: AMPRNet working group<mailto:44net@mailman.ampr.org> Subject: [44net] Re: IPIP tunnel for Mikrotik No, it is not possible for now. The expiry timers for RIP in ROS7 can not be adjusted to fit our purposes (i.e. period 5min instead of 20sec, expiry 15min instead of 1 min). If this will ever be fixed is unknown, since very few people use RIP, let alone adjust the timers. On 18/09/2023 20:43, KUN LIN via 44net wrote: Oh, I am on ROS7/CHR. Is there a way to get it work on ROS7? Kun From: Marius Petrescu via 44net <44net@mailman.ampr.org><mailto:44net@mailman.ampr.org> Sent: Monday, September 18, 2023 9:18 To: 44net@mailman.ampr.org<mailto:44net@mailman.ampr.org> <44net@mailman.ampr.org><mailto:44net@mailman.ampr.org> Subject: [44net] Re: IPIP tunnel for Mikrotik The v3.1 scripts are for ROS up to 6.40, and the v3.2 scripts from ROS 6.41 up to the latest v6 releases. The scripts do NOT work on ROS 7 due to the fact that the RIP handling changed and the RIP timers do not work correctly. Marius, YO2LOJ On 18/09/2023 18:01, KUN LIN via 44net wrote: Hi Has anyone setup the IPIP tunnel successfully in Mikrotik? I think the instruction in Wiki is written for ROS 2.0. Things has changed a lot and I have trouble following. I created the IPIP tunnel in the interface and not sure what to do next. I added my IP subnet to the IP tab. The RIP configuration menu is very different now. Kun _______________________________________________ 44net mailing list -- 44net@mailman.ampr.org<mailto:44net@mailman.ampr.org> To unsubscribe send an email to 44net-leave@mailman.ampr.org<mailto:44net-leave@mailman.ampr.org> _______________________________________________ 44net mailing list -- 44net@mailman.ampr.org<mailto:44net@mailman.ampr.org> To unsubscribe send an email to 44net-leave@mailman.ampr.org<mailto:44net-leave@mailman.ampr.org> _______________________________________________ 44net mailing list -- 44net@mailman.ampr.org<mailto:44net@mailman.ampr.org> To unsubscribe send an email to 44net-leave@mailman.ampr.org<mailto:44net-leave@mailman.ampr.org> _______________________________________________ 44net mailing list -- 44net@mailman.ampr.org<mailto:44net@mailman.ampr.org> To unsubscribe send an email to 44net-leave@mailman.ampr.org<mailto:44net-leave@mailman.ampr.org>

I see the options to set expirations time in Winbox. Is it ignored? I don't know how to verify that Kun ________________________________ From: "Matthew H (2E0SIP)" &lt;44net(a)marrold.co.uk&gt; Sent: Friday, September 22, 2023 12:36 PM To: KUN LIN Cc: 44net(a)mailman.ampr.org Subject: Re: [44net] Re: IPIP tunnel for Mikrotik Is there any thread on the Mikrotik forum mentioning this, so I can bump it? Thanks On Wed, Sep 20, 2023 at 5:42 PM KUN LIN via 44net <44net@mailman.ampr.org<mailto:44net@mailman.ampr.org>> wrote: How do I test those parameters? There are a lot of version updates. Kun From: Marius Petrescu via 44net<mailto:44net@mailman.ampr.org> Sent: Wednesday, September 20, 2023 12:18 AM To: 44net@mailman.ampr.org<mailto:44net@mailman.ampr.org> Subject: [44net] Re: IPIP tunnel for Mikrotik I have, it doesn't. The timing parameters simply get ignored. On 20/09/2023 10:15, Ruben ON3RVH via 44net wrote: Hi Marius, I think it should be able to work in v7: (have not tested it myself) https://help.mikrotik.com/docs/display/ROS/RIP Sub-menu: /routing rip instance route-timeout (Default: ) route timeout update-interval (time; Default: ) specifies time interval after which the route is considered invalid 73 Ruben ON3RVH From: Marius Petrescu via 44net <44net@mailman.ampr.org><mailto:44net@mailman.ampr.org> Sent: Wednesday, September 20, 2023 02:30 To: AMPRNet working group <44net@mailman.ampr.org><mailto:44net@mailman.ampr.org> Subject: [44net] Re: IPIP tunnel for Mikrotik The tables will populate all right. The problem is they will clear after 3 minutes if I remember correctly, and not persist to the next 5 min update period, screwing up the whole concept behind the script about maintaining the individual dynamic generated tunnels and routes. I haven't checked the latest ROS7 versions, but that was the main reason why a porting of the scripts to ROS7 was not possible. On 20/09/2023 03:23, KUN LIN via 44net wrote: It looks like my Mikrotik’s routing table did updated with all the 44 routes eventhough I only configured a RIP but no script? I don’t know how to verify if those routes actually working. Kun From: Marius Petrescu via 44net<mailto:44net@mailman.ampr.org> Sent: Monday, September 18, 2023 11:03 AM To: AMPRNet working group<mailto:44net@mailman.ampr.org> Subject: [44net] Re: IPIP tunnel for Mikrotik No, it is not possible for now. The expiry timers for RIP in ROS7 can not be adjusted to fit our purposes (i.e. period 5min instead of 20sec, expiry 15min instead of 1 min). If this will ever be fixed is unknown, since very few people use RIP, let alone adjust the timers. On 18/09/2023 20:43, KUN LIN via 44net wrote: Oh, I am on ROS7/CHR. Is there a way to get it work on ROS7? Kun From: Marius Petrescu via 44net <44net@mailman.ampr.org><mailto:44net@mailman.ampr.org> Sent: Monday, September 18, 2023 9:18 To: 44net@mailman.ampr.org<mailto:44net@mailman.ampr.org> <44net@mailman.ampr.org><mailto:44net@mailman.ampr.org> Subject: [44net] Re: IPIP tunnel for Mikrotik The v3.1 scripts are for ROS up to 6.40, and the v3.2 scripts from ROS 6.41 up to the latest v6 releases. The scripts do NOT work on ROS 7 due to the fact that the RIP handling changed and the RIP timers do not work correctly. Marius, YO2LOJ On 18/09/2023 18:01, KUN LIN via 44net wrote: Hi Has anyone setup the IPIP tunnel successfully in Mikrotik? I think the instruction in Wiki is written for ROS 2.0. Things has changed a lot and I have trouble following. I created the IPIP tunnel in the interface and not sure what to do next. I added my IP subnet to the IP tab. The RIP configuration menu is very different now. Kun _______________________________________________ 44net mailing list -- 44net@mailman.ampr.org<mailto:44net@mailman.ampr.org> To unsubscribe send an email to 44net-leave@mailman.ampr.org<mailto:44net-leave@mailman.ampr.org> _______________________________________________ 44net mailing list -- 44net@mailman.ampr.org<mailto:44net@mailman.ampr.org> To unsubscribe send an email to 44net-leave@mailman.ampr.org<mailto:44net-leave@mailman.ampr.org> _______________________________________________ 44net mailing list -- 44net@mailman.ampr.org<mailto:44net@mailman.ampr.org> To unsubscribe send an email to 44net-leave@mailman.ampr.org<mailto:44net-leave@mailman.ampr.org> _______________________________________________ 44net mailing list -- 44net@mailman.ampr.org<mailto:44net@mailman.ampr.org> To unsubscribe send an email to 44net-leave@mailman.ampr.org<mailto:44net-leave@mailman.ampr.org> _______________________________________________ 44net mailing list -- 44net@mailman.ampr.org<mailto:44net@mailman.ampr.org> To unsubscribe send an email to 44net-leave@mailman.ampr.org<mailto:44net-leave@mailman.ampr.org>

Nothing has changed. And it probably never will. Adrian, YO8RXT is playing around with it and just confirmed the "nothing new" status. You have to stick with a 6.xx firmware for now for it to work. Marius, YO2LOJ On 18/06/2024 20:12, Frederic Zulian wrote: