44net-request@hamradio.ucsd.edu wrote:

Subject: Re: [44net] 44Net Digest, Vol 3, Issue 136 From: Libor Berka ok2pen@seznam.cz Date: 08/27/2014 10:24 PM

To: 44net@hamradio.ucsd.edu

Re wrong server IP, Brian sorry but that was my writing msg error, the IP in my ampr-run start script is correct 169.228.66.251 There must be some other problem. Libor

Libor,

You should not need the address of the ampr gateway in your script, so that is probably where the error is. The RIP packets are sent by 44.0.0.1, that is what you should allow to pass your firewall.

Don't be misled by RIP packets sent by 169.228.66.251, they have source and destination port numbers reversed and will not be processed by the ampr-ripd. I think they would better be removed because they add confusion.

Rob