14 Jan
2023
14 Jan
'23
10:32 a.m.
Hello to those on the list.
Spectrum (formerly Charter) laid new fiber in my neighborhood and is
offering a pretty enticing deal, especially considering I'm on a vdsl based
service now. My current ISP has a router with a "pass-through" DMZ mode,
which I use to get protocol 4 to a Ubiquiti router that runs ampr-ripd.
Is there anyone on the list that is using a relatively new service from
Spectrum and is able to pass protocol 4 for amprnet?
Thanks and 73,
Lee K5DAT
14 Jan
14 Jan
12:12 p.m.
I'm a Spectrum customer in Wisconsin, though its not fiber to the
premise here. It's over cable using docsis. I am using my own modem
(SB8200) and have had no problems for years.
Hope this helps.
Steve, KB9MWR
On Sat, Jan 14, 2023 at 9:33 AM Lee D Bengston via 44net
<44net(a)mailman.ampr.org> wrote:
Hello to those on the list.
Spectrum (formerly Charter) laid new fiber in my neighborhood and is offering a pretty
enticing deal, especially considering I'm on a vdsl based service now. My current ISP
has a router with a "pass-through" DMZ mode, which I use to get protocol 4 to a
Ubiquiti router that runs ampr-ripd.
Is there anyone on the list that is using a relatively new service from Spectrum and is
able to pass protocol 4 for amprnet?
Thanks and 73,
Lee K5DAT
_______________________________________________
44net mailing list -- 44net(a)mailman.ampr.org
To unsubscribe send an email to 44net-leave(a)mailman.ampr.org
12:50 p.m.
Why are you relying on the provided modem? It's almost certainly not going
to do what you want. Buy your own modem/firewall device. That way you'll be
able to make all the DMZ features you want.
On Sat, Jan 14, 2023, 12:12 Steve L via 44net <44net(a)mailman.ampr.org>
wrote:
I'm a Spectrum customer in Wisconsin, though its
not fiber to the
premise here. It's over cable using docsis. I am using my own modem
(SB8200) and have had no problems for years.
Hope this helps.
Steve, KB9MWR
On Sat, Jan 14, 2023 at 9:33 AM Lee D Bengston via 44net
<44net(a)mailman.ampr.org> wrote:
Hello to those on the list.
Spectrum (formerly Charter) laid new fiber in my neighborhood and is
offering a
pretty enticing deal, especially considering I'm on a vdsl based
service now. My current ISP has a router with a "pass-through" DMZ mode,
which I use to get protocol 4 to a Ubiquiti router that runs ampr-ripd.
Is there anyone on the list that is using a relatively new service from
Spectrum
and is able to pass protocol 4 for amprnet?
Thanks and 73,
Lee K5DAT
_______________________________________________
44net mailing list -- 44net(a)mailman.ampr.org
To unsubscribe send an email to 44net-leave(a)mailman.ampr.org
_______________________________________________
44net mailing list -- 44net(a)mailman.ampr.org
To unsubscribe send an email to 44net-leave(a)mailman.ampr.org
1:06 p.m.
If your getting fiber it is most likely GPON and you will have an ONT with an ethernet
port. You should be able to use your own equipment connected to the ethernet port.
diana
On January 14, 2023 8:32:25 AM MST, Lee D Bengston via 44net
<44net(a)mailman.ampr.org> wrote:
Hello to those on the list.
Spectrum (formerly Charter) laid new fiber in my neighborhood and is
offering a pretty enticing deal, especially considering I'm on a vdsl based
service now. My current ISP has a router with a "pass-through" DMZ mode,
which I use to get protocol 4 to a Ubiquiti router that runs ampr-ripd.
Is there anyone on the list that is using a relatively new service from
Spectrum and is able to pass protocol 4 for amprnet?
Thanks and 73,
Lee K5DAT
2:45 p.m.
Thanks everyone for all the replies. I installed new ONT's and swapped out
failed ones when my employer made me fill in for a union on strike back in
2016. Most of those used MoCA - so coax not Ethernet. On the new service,
yes, I've been hoping the uplink is Ethernet so that I can use my Ubiquiti
router directly without needing the router provided by Spectrum. As of
2018 I live in Wisconsin in a neighborhood that until recently only had one
option, Frontier DSL. Frontier has been running fiber not far from home,
so maybe there will be 2 fiber options in my neighborhood soon.
On the question about why I'm currently relying on the provider's
modem/router, I figured I'd be out of DSL eventually, so I didn't want to
buy a throw-away DSL box, especially since the one they provided has a
pass-through mode that allows my Ubiquiti router to share the public IP
address.
73,
Lee K5DAT
On Sat, Jan 14, 2023 at 12:06 PM KI5PGJ via 44net <44net(a)mailman.ampr.org>
wrote:
If your getting fiber it is most likely GPON and you
will have an ONT with
an ethernet port. You should be able to use your own equipment connected
to the ethernet port.
diana
On January 14, 2023 8:32:25 AM MST, Lee D Bengston via 44net <
44net(a)mailman.ampr.org> wrote:
Hello to those on the list.
Spectrum (formerly Charter) laid new fiber in my neighborhood and is
offering a pretty enticing deal, especially considering I'm on a vdsl based
service now. My current ISP has a router with a "pass-through" DMZ mode,
which I use to get protocol 4 to a Ubiquiti router that runs ampr-ripd.
Is there anyone on the list that is using a relatively new service from
Spectrum and is able to pass protocol 4 for amprnet?
Thanks and 73,
Lee K5DAT
_______________________________________________
44net mailing list -- 44net(a)mailman.ampr.org
To unsubscribe send an email to 44net-leave(a)mailman.ampr.org
677
days inactive
677
days old
4 comments
4 participants
participants (4)
-
KI5PGJ -
Lee D Bengston -
Mark Phillips -
Steve L