Subject: Re: [44net] 44Net Digest, Vol 2, Issue 156 From: sp2lob@tlen.pl Date: 10/03/2013 07:53 AM
To: "AMPRNet working group" 44net@hamradio.ucsd.edu
Hello Rob et al,
My Raspberry Pi is behing own TL-MR3420 router. When I ran ripd44 for the very first time it didn't worked. Following suggestion by one of U.S. hams, I put Pi into DMZ zone - ripd44d automagically revived!
Ok, but as I explained before, my Raspberry Pi is directly on the internet. I don't have problems with routers, NAT, DMZ zones or whatever.
I have the issue that Hessu explains (Multicast socket not working; raw socket OK) but in my case it must be caused by something different than rp_filter.
Is your Pi running Raspbian? What does it say when you enter: zgrep CONFIG_IP_MROUTE /proc/config.gz
Rob
Rob,
I'll be back home friday morning, then I will check and answer your question.
Best regards. Tom - sp2lob