Hi everyone Is there anyone here that know or did DYNDNS client for Cisco routers ? I know that a command can be set at the rouuter to do it I need to take the IP address that the router get from my ISP (the Commercial IP which is a dynamic IP ) and send it to the ddns system (in my case it is no-ip.com) the router have to connect via HTTP to the no-ip web (there is a web address that reply the ip that it see that cobnnect to it ) and then update the no-ip (again via http protocol) I know it can be done i didnt succeded have anyone did it or willing to help me to accomplish it? Thanks Forward Ronen - 4Z4ZQ http://www.ronen.org
I no longer have the exact config that I used, but I did that for many years. Try this site - it looks like the settings I used.
https://www.bytesolutions.com/setup-ddns-dynamic-dns-cisco-ios-router/
--
73 de Phil Pacier, AD6NH APRS Tier2 Network Coordinator http://www.aprs2.net D-Star Administrator: W6HRO & REF070
On 10/2/2019 10:08 AM, R P via 44Net wrote:
Hi everyone Is there anyone here that know or did DYNDNS client for Cisco routers ? I know that a command can be set at the rouuter to do it I need to take the IP address that the router get from my ISP (the Commercial IP which is a dynamic IP ) and send it to the ddns system (in my case it is no-ip.com) the router have to connect via HTTP to the no-ip web (there is a web address that reply the ip that it see that cobnnect to it ) and then update the no-ip (again via http protocol) I know it can be done i didnt succeded have anyone did it or willing to help me to accomplish it? Thanks Forward Ronen - 4Z4ZQ http://www.ronen.org
44Net mailing list 44Net@mailman.ampr.org https://mailman.ampr.org/mailman/listinfo/44net
Ronen: I can't help you with a Cisco client and I assume you have considered having a client run on a host behind the client? Also, check out duckdns.org, they are very easy to script a client for, and they have good examples. Assi
-----Original Message----- From: 44Net 44net-bounces+assi=kiloxray.com@mailman.ampr.org On Behalf Of R P via 44Net Sent: Wednesday, October 2, 2019 10:09 AM To: 44net@mailman.ampr.org Cc: R P ronenp@hotmail.com Subject: [44net] DYNDNS Script for Cisco Routers
Hi everyone Is there anyone here that know or did DYNDNS client for Cisco routers ? I know that a command can be set at the rouuter to do it I need to take the IP address that the router get from my ISP (the Commercial IP which is a dynamic IP ) and send it to the ddns system (in my case it is no-ip.com) the router have to connect via HTTP to the no-ip web (there is a web address that reply the ip that it see that cobnnect to it ) and then update the no-ip (again via http protocol) I know it can be done i didnt succeded have anyone did it or willing to help me to accomplish it? Thanks Forward Ronen - 4Z4ZQ http://www.ronen.org
_________________________________________ 44Net mailing list 44Net@mailman.ampr.org https://mailman.ampr.org/mailman/listinfo/44net
-
Assi Friedman -
Phil Pacier - AD6NH -
R P