It certainly will NOT work for x86.
-----Original Message-----
From: Jean-Marc Magnier
Sent: Sunday, February 14, 2016 11:27
To: 'AMPRNet working group'
Subject: Re: [44net] ampr-ripd for openwrt
(Please trim inclusions from previous messages)
_______________________________________________
Hi Marius
Thanks. I will try it. However, I'm not sure it will work for x86.
73 QRO from F1SCA
-----Message d'origine-----
De : 44Net
[mailto:44net-bounces+magnier.jeanmarc=numericable.fr@hamradio.ucsd.edu] De
la part de Marius Petrescu
Envoyé : dimanche 14 février 2016 09:01
À : 'AMPRNet working group' <44net(a)hamradio.ucsd.edu>
Objet : Re: [44net] ampr-ripd for openwrt
(Please trim inclusions from previous messages)
_______________________________________________
Hi
I have version 1.6 compiled for the mipsbe architecture and packet as a ipk:
http://yo2loj.ro/openwrt/mr-mips/packages/ampr-ripd_1.6-1_mr-mips.ipk
Not the latest, but it could work.
Marius, YO2LOJ
-----Original Message-----
From: Jean-Marc Magnier
Sent: Sunday, February 14, 2016 03:36
To: 'AMPRNet working group'
Subject: Re: [44net] ampr-ripd for openwrt
(Please trim inclusions from previous messages)
_______________________________________________
Hi Steve,
Thanks for the reply. Unfortunately, I won't have access to 44 net untill I
have set up my gateway (and got ampr-ripd to fire it).
I'am in a sad ring :-)
73 from F1SCA
-----Message d'origine-----
De : 44Net
[mailto:44net-bounces+magnier.jeanmarc=numericable.fr@hamradio.ucsd.edu] De
la part de Steve L Envoyé : dimanche 14 février 2016 01:37 À :
44net(a)hamradio.ucsd.edu Objet : [44net] ampr-ripd for openwrt
(Please trim inclusions from previous messages)
_______________________________________________
Lynwood managed to cross-compile ampr-ripd v1.13
OpenWrt-ar71xx-for-mips_34kc back in August 2015. You can look at this
lists archives around that time for any other notes.
His binary and some other things can be found at
http://44.60.44.10/amprnet_docs/
Note: Only accessible via 44net, else 403:
Hi,
Does anyone know where I can find a compiled version of ampr-ripd for
openwrt (backfire) ? I can't find gcc for Backfire :-( Same nightmare
about rip44d, perl multicast not available for Backfire.
Thanks in advance
73 from F1SCA
_________________________________________
44Net mailing list
44Net(a)hamradio.ucsd.edu
http://hamradio.ucsd.edu/mailman/listinfo/44net
_________________________________________
44Net mailing list
44Net(a)hamradio.ucsd.edu
http://hamradio.ucsd.edu/mailman/listinfo/44net
_________________________________________
44Net mailing list
44Net(a)hamradio.ucsd.edu
http://hamradio.ucsd.edu/mailman/listinfo/44net
_________________________________________
44Net mailing list
44Net(a)hamradio.ucsd.edu
http://hamradio.ucsd.edu/mailman/listinfo/44net