Although I wanted to provide a freely accessible demo for ALL ham operators as an configuration example on an EdgeRouter, I'm starting to have my doubts.
Especially to w6ray...
What is the use of hanging on a router web interface for 24h now? What new information could it give you by watching its interface?
Marius, YO2LOJ
On 3/24/2019 05:16, Marius Petrescu wrote:
Although I wanted to provide a freely accessible demo for ALL ham operators as an configuration example on an EdgeRouter, I'm starting to have my doubts.
Especially to w6ray...
What is the use of hanging on a router web interface for 24h now? What new information could it give you by watching its interface?
Marius, I have sent the following email to you directly. This one is for the public:
Marius,
First, my apologies! I did not realize that the connection was continuous. Had I, I would have stopped the browser. I had been looking around hoping to find examples to configure my ERX and had to step away from the computer. It is because you spend so much of your personal time to help others that I purchased an EdgeRouter X and have been trying to get my gateway back online. If there are more static examples as to how I can route the traffic for myself to my packet computer (A Pi 3B), please direct me to them. Hopefully from the "outside" of 44net. I have been meaning to ask a question on the list, but someone else seems to have the same one and asks first.
Second, please don't let the oversight of one take something valuable away from others. I am truly sorry!!
Ray, no harm done, it just seemed odd... I overreacted, sorry..
I just updated the router to EdgeOS 2.0.1 and it is still working :-)
I think this is what you are looking for...
http://www.yo2loj.ro/hamprojects/Ampr_ER_SetupInfo.txt
In the download, just replace the packet with the one for ER-X.
I would recommend to try it on FW 1.10.8 first...
I have no ER-X, but it should be just the same as on the ER Lite. Just the binary is different because it's a different processor (mips64 on the Lite, mipsle on the X).
Maybe Pete, VE2PF reads this and has some hints, since he is trying to get the same thing up and running.
Marius, YO2LOJ
On 24.03.2019 20:35, Ray Quinn wrote:
On 3/24/2019 05:16, Marius Petrescu wrote:
Although I wanted to provide a freely accessible demo for ALL ham operators as an configuration example on an EdgeRouter, I'm starting to have my doubts.
Especially to w6ray...
What is the use of hanging on a router web interface for 24h now? What new information could it give you by watching its interface?
Marius, I have sent the following email to you directly. This one is for the public:
Marius,
First, my apologies! I did not realize that the connection was continuous. Had I, I would have stopped the browser. I had been looking around hoping to find examples to configure my ERX and had to step away from the computer. It is because you spend so much of your personal time to help others that I purchased an EdgeRouter X and have been trying to get my gateway back online. If there are more static examples as to how I can route the traffic for myself to my packet computer (A Pi 3B), please direct me to them. Hopefully from the "outside" of 44net. I have been meaning to ask a question on the list, but someone else seems to have the same one and asks first.
Second, please don't let the oversight of one take something valuable away from others. I am truly sorry!!
Ok. I reviewed the ER setup instruction and found an error. Updated/corrected...
It seems that FW 2.0.1 has some issues on starting scrips, so that ampr-ripd is started before the tunnel is up (rc.local is not run after startup is complete).
So please use 1.10.9.
On 24.03.2019 23:57, Marius Petrescu wrote:
Ok. I reviewed the ER setup instruction and found an error. Updated/corrected...
http://www.yo2loj.ro/hamprojects/Ampr_ER_SetupInfo.txt
44Net mailing list 44Net@mailman.ampr.org https://mailman.ampr.org/mailman/listinfo/44net
Solved, packages updated :-)
On 25.03.2019 02:11, Marius Petrescu wrote:
It seems that FW 2.0.1 has some issues on starting scrips, so that ampr-ripd is started before the tunnel is up (rc.local is not run after startup is complete).
So please use 1.10.9.
On 24.03.2019 23:57, Marius Petrescu wrote:
Ok. I reviewed the ER setup instruction and found an error. Updated/corrected...
http://www.yo2loj.ro/hamprojects/Ampr_ER_SetupInfo.txt
44Net mailing list 44Net@mailman.ampr.org https://mailman.ampr.org/mailman/listinfo/44net
44Net mailing list 44Net@mailman.ampr.org https://mailman.ampr.org/mailman/listinfo/44net
Meaning what? You've updated the story so many times it's not's clear what is the right combination anymore. - Brian
On Mon, Mar 25, 2019 at 03:08:01AM +0200, Marius Petrescu wrote:
Solved, packages updated :-)
On 25.03.2019 02:11, Marius Petrescu wrote:
It seems that FW 2.0.1 has some issues on starting scrips, so that ampr-ripd is started before the tunnel is up (rc.local is not run after startup is complete).
So please use 1.10.9.
On 24.03.2019 23:57, Marius Petrescu wrote:
Ok. I reviewed the ER setup instruction and found an error. Updated/corrected...
Sorry Brian for this mess and that is the story for now :-)
I updated all packages on the server with corrections so they work on 1.10.x and 2.0.x Edgerouter firmwares.
Just following the steps as written in
http://www.yo2loj.ro/hamprojects/Ampr_ER_SetupInfo.txt
should get it running...
Marius, YO2LOJ
On 25.03.2019 03:19, Brian Kantor wrote:
Meaning what? You've updated the story so many times it's not's clear what is the right combination anymore.
- Brian
On Mon, Mar 25, 2019 at 03:08:01AM +0200, Marius Petrescu wrote:
Solved, packages updated :-)
On 25.03.2019 02:11, Marius Petrescu wrote:
It seems that FW 2.0.1 has some issues on starting scrips, so that ampr-ripd is started before the tunnel is up (rc.local is not run after startup is complete).
So please use 1.10.9.
On 24.03.2019 23:57, Marius Petrescu wrote:
Ok. I reviewed the ER setup instruction and found an error. Updated/corrected...
44Net mailing list 44Net@mailman.ampr.org https://mailman.ampr.org/mailman/listinfo/44net
Hi all,
After a long break (house move, baby etc) I am getting a gateway up again at 79.77.173.61. I am a bit rusty so I apologise for any strange traffic whilst I get sorted.
Regards Marc (2w0pnt)
On 25 Mar 2019, 07:16, at 07:16, Marius Petrescu marius@yo2loj.ro wrote:
Sorry Brian for this mess and that is the story for now :-)
I updated all packages on the server with corrections so they work on 1.10.x and 2.0.x Edgerouter firmwares.
Just following the steps as written in
http://www.yo2loj.ro/hamprojects/Ampr_ER_SetupInfo.txt
should get it running...
Marius, YO2LOJ
On 25.03.2019 03:19, Brian Kantor wrote:
Meaning what? You've updated the story so many times it's not's clear what is the right combination anymore.
- Brian
On Mon, Mar 25, 2019 at 03:08:01AM +0200, Marius Petrescu wrote:
Solved, packages updated :-)
On 25.03.2019 02:11, Marius Petrescu wrote:
It seems that FW 2.0.1 has some issues on starting scrips, so that ampr-ripd is started before the tunnel is up (rc.local is not run after startup is complete).
So please use 1.10.9.
On 24.03.2019 23:57, Marius Petrescu wrote:
Ok. I reviewed the ER setup instruction and found an error. Updated/corrected...
44Net mailing list 44Net@mailman.ampr.org https://mailman.ampr.org/mailman/listinfo/44net
44Net mailing list 44Net@mailman.ampr.org https://mailman.ampr.org/mailman/listinfo/44net
I am at a stand still with the project as I got a heavy load of work and at the same time received every parts I needed to build a radioberry.
Still reading the messages on the mailing list. Just lack some time ;-)
________________________________ De : 44Net 44net-bounces+petem001=hotmail.com@mailman.ampr.org de la part de Marius Petrescu marius@yo2loj.ro Envoyé : 24 mars 2019 16:30 À : AMPRNet working group; Ray Quinn Objet : Re: [44net] Router demo
Ray, no harm done, it just seemed odd... I overreacted, sorry..
I just updated the router to EdgeOS 2.0.1 and it is still working :-)
I think this is what you are looking for...
http://www.yo2loj.ro/hamprojects/Ampr_ER_SetupInfo.txt
In the download, just replace the packet with the one for ER-X.
I would recommend to try it on FW 1.10.8 first...
I have no ER-X, but it should be just the same as on the ER Lite. Just the binary is different because it's a different processor (mips64 on the Lite, mipsle on the X).
Maybe Pete, VE2PF reads this and has some hints, since he is trying to get the same thing up and running.
Marius, YO2LOJ
On 24.03.2019 20:35, Ray Quinn wrote:
On 3/24/2019 05:16, Marius Petrescu wrote:
Although I wanted to provide a freely accessible demo for ALL ham operators as an configuration example on an EdgeRouter, I'm starting to have my doubts.
Especially to w6ray...
What is the use of hanging on a router web interface for 24h now? What new information could it give you by watching its interface?
Marius, I have sent the following email to you directly. This one is for the public:
Marius,
First, my apologies! I did not realize that the connection was continuous. Had I, I would have stopped the browser. I had been looking around hoping to find examples to configure my ERX and had to step away from the computer. It is because you spend so much of your personal time to help others that I purchased an EdgeRouter X and have been trying to get my gateway back online. If there are more static examples as to how I can route the traffic for myself to my packet computer (A Pi 3B), please direct me to them. Hopefully from the "outside" of 44net. I have been meaning to ask a question on the list, but someone else seems to have the same one and asks first.
Second, please don't let the oversight of one take something valuable away from others. I am truly sorry!!
_________________________________________ 44Net mailing list 44Net@mailman.ampr.org https://mailman.ampr.org/mailman/listinfo/44net
-
Brian Kantor -
Marc Williams -
Marius Petrescu -
pete M -
Ray Quinn