hi marius -- can we run the new script with the older ROS? On 12/23/2017 4:42 AM, Marc wrote: > Thanks for your efforts :) > > ⁣Sent from BlueMail ​ > > On 22 Dec 2017, 20:45, at 20:45, Marius Petrescu <marius(a)yo2loj.ro> wrote: >> Hello, >> >> Mikrotik released its new RouterOS version 6.41, with some changes >> affecting the gateway script. >> >> I released an updated script version to address this issue. >> >> For those using pre-6.41 ROS, the update is not necessary. >> If you want to correct the script manually, just delete the line >> referring to neighbor discovery disabling in the 'add new tunnel' >> section of the ampr_gw script whic states: >> /ip neighbor discovery set $gw discover=no >> >> As usual, download at: >> >> http://www.yo2loj.ro/hamprojects/ >> >> http://yo2tm.ampr.org/hamprojects/ >> >> Marius, YO2LOJ >> >> >> _________________________________________ >> 44Net mailing list >> 44Net(a)mailman.ampr.org >> https://mailman.ampr.org/mailman/listinfo/44net >

HI Marius...ok thanks will keep as is...not looking to upgrade yet too many issues and not ready to deal with the switch/bridge stuff 73 leon On 12/23/2017 11:38 AM, Marius Petrescu wrote: > You can, but please do not. > > It will enable neighbor discovery on new tunnels, which is not desired > and creates useless traffic. > There are no functional changes except this. > > Marius, YO2LOJ > > On 23.12.2017 16:56, Leon Zetekoff wrote: >> hi marius -- can we run the new script with the older ROS? >> >> >> On 12/23/2017 4:42 AM, Marc wrote: >>> Thanks for your efforts :) >>> >>> ⁣Sent from BlueMail ​ >>> >>> On 22 Dec 2017, 20:45, at 20:45, Marius Petrescu <marius(a)yo2loj.ro> >>> wrote: >>>> Hello, >>>> >>>> Mikrotik released its new RouterOS version 6.41, with some changes >>>> affecting the gateway script. >>>> >>>> I released an updated script version to address this issue. >>>> >>>> For those using pre-6.41 ROS, the update is not necessary. >>>> If you want to correct the script manually, just delete the line >>>> referring to neighbor discovery disabling in the 'add new tunnel' >>>> section of the ampr_gw script whic states: >>>> /ip neighbor discovery set $gw discover=no >>>> >>>> As usual, download at: >>>> >>>> http://www.yo2loj.ro/hamprojects/ >>>> >>>> http://yo2tm.ampr.org/hamprojects/ >>>> >>>> Marius, YO2LOJ >>>> >>>> >>>> _________________________________________ >>>> 44Net mailing list >>>> 44Net(a)mailman.ampr.org >>>> https://mailman.ampr.org/mailman/listinfo/44net >>>