What old commands are you referring to? I am running a gateway that I have documented below: https://www.qsl.net/kb9mwr/wapr/tcpip/ampr-ripd.html On Thu, Dec 17, 2020 at 8:25 PM Chris Maness via 44Net <44net(a)mailman.ampr.org> wrote: > > I am having a major headache trying to get my encap tunnels going. > Old commands don't seem to work correctly. I can make single tun* > devices for each IPIP route and they work, but I know I should be able > to add routes to tunl0 device and have them all encapsulated when I > use the gw flag in routes add command. This is not working on the > Raspberry Pi. > > -Chris KQ6UP > _________________________________________ > 44Net mailing list > 44Net(a)mailman.ampr.org > https://mailman.ampr.org/mailman/listinfo/44net

It is the correct one, and if you use a recent ampr-ripd you don't need to add it by hand. On 18.12.2020 06:12, Chris Maness via 44Net wrote: > Ok, looks like ampr-ripd is now talking as it is giving me the > PlaInTextPasWd message. What is the password for RIP broadcasts? > > -Chris KQ6UP > https://mailman.ampr.org/mailman/listinfo/44net