Rob and all, Not sure if my other message got to Rob but sending it here to group. My NSP finally announced the new 44.190.10.0/24 and I have 5 proxy and 5 relays setup at the following relay addresses, feel free to add to the relay list: Relay_0=44.190.10.240 Relay_1=44.190.10.241 Relay_2=44.190.10.242 Relay_3=44.190.10.243 Relay_4=44.190.10.244 I've able to successful test connecting to my proxy manually with Echolink software. Only way I was able to test the Relay was looking at my log and see the connection, which appears to be working. It's a straight forward setup and instructions was clear. I can scale up as needed. -bn 0216331C On Thu, Apr 26, 2018 at 11:30 AM, Rob Janssen <pe1chl(a)amsat.org> wrote: >> >/3) Obtained and compiled Rob Jenssen’s C program, configured it per the >> > instructions. /> I have read the docs, looks pretty straightforward, though >> > I have a bit >> of migration to do - after initial testing, I have several existing >> private proxies to migrate to the binary, then create the public ones on >> the 44.x addresses. > > > For everyone's info: I have updated the file at > http://pe1chl.nl.eu.org/Softw/elproxy.tar.gz > (also available on www.pe1chl.ampr.org on net44) to include an init.d script > example and > a logrotate.d config file. Everything else is unchanged. > > I welcome corrections or suggestions for changes in the README file when > something > is unclear. Make sure you follow everything written in the file as it is > now. > (especially the part about sysctl and the proxy_message logging) > > I should probably some description of what proxies and relays are and how > they are used, > that was already sent to this list however. > > Rob > >