On Sun, Feb 26, 2012 at 3:44 PM, Chris Maness chris@chrismaness.com wrote:
On Sun, Feb 26, 2012 at 12:01 PM, Raymond Quinn w6ray@sbcglobal.net wrote:
Hmmm. I see you have a link with Brett, WA7V.
He also has static addresses, and was able to assign a commercial IP address to his linux box, as well as his NOS side.
You might want to consult him on how that is done.
In the mean time, does your JNOS have a LAN address of 192.168.x.x ??
It is behind a DSL Modem/Router. It is a 2wire. However, I have 5 static IPs. It does not allow me to use one of the public IPs for Jnos. It does not add that IP to the local network list for configuration, and therfore does not permit traffic to Jnos. I therfore had to use the munge script to build tunnels in Linux. This is ok, because it does protect Jnos from attacks.
Chris,
It appears that you have the same or quite similar setup that I have. I have my Linux box with a public static IP address and use that in the POINTOPOINT line. Eventually, the Linux box will appear in the 2wire and when it does, should automatically allow all traffic to that static address.
It does exactly that.
(Of course, at present JNOS is locking up after a few hours, but that is unrelated)
If you don't hear from Brett, I am willing to share what I have worked out. I still have more to do, but it may get you started. As always, make sure you make a backup of your current setup should it not work as mine does.
It works just fine save one host on AMPR-NET. I wouldn't care save he is my friend and one of the closest *NOS BBS to my site.
I had also been in touch with AT&T customer service. The suggested I purchase a Motorola router from them. I wish my Linux box was back behind a Cisco on a commercial T1 like it was in the beginning. I had direct 44net-to-inet connectivity. However, the AT&T network is controlled by the packet Gustapo goose stepping with their tight firewall rules. I guess that is good for the brain dead masses, but it kind of makes playing with the stuff we do a pain in the toosh.
Thaks es 73's de Chris KQ6UP
My Linux box can ping his Linux box, so that is good. I am not sure I have the whole doted quad with a forward slash business down. I think this is his encap.txt entry:
route addprivate 44.16.2.32/27 encap 173.60.166.190
Since I believe that 44.16.2.46 is included in that subnet. Is the above subnet 44.16.2.32-64?
Thanks, Chris Maness
On Sun, 26 Feb 2012 16:00:17 -0800, Chris Maness chris@chrismaness.com wrote:
route addprivate 44.16.2.32/27 encap 173.60.166.190
Since I believe that 44.16.2.46 is included in that subnet. Is the above subnet 44.16.2.32-64?
Yes, it's included in that group. The address group is 32-63. 64 would be in the next block (64-95).
Hi Chris:
The 44.16.2.32/27 subnet is: 44.16.2.32/27 44.16.2.32 to 44.16.2.63
Jim Fuller N7VR -- http://www.n7vr.org International TCP/IP Gateways Robot Operator -- http://www.ampr-gateways.org
MTAPRS NET Server Operator -- http://www.mtaprs.net CWOP-2 -- http://www.wxqa.com IRLP Node 3398 - http://irlp.fuller.net Original ARECC contributor
-----Original Message----- From: Chris Maness [mailto:chris@chrismaness.com] Sent: Sunday, February 26, 2012 5:00 PM To: w6ray@sbcglobal.net; AMPRNet working group Subject: Re: [44net] Intermittent host connectivity issues
On Sun, Feb 26, 2012 at 3:44 PM, Chris Maness chris@chrismaness.com wrote:
On Sun, Feb 26, 2012 at 12:01 PM, Raymond Quinn w6ray@sbcglobal.net
wrote:
Hmmm. I see you have a link with Brett, WA7V.
He also has static addresses, and was able to assign a commercial IP address to his linux box, as well as his NOS side.
You might want to consult him on how that is done.
In the mean time, does your JNOS have a LAN address of 192.168.x.x ??
It is behind a DSL Modem/Router. It is a 2wire. However, I have 5 static IPs. It does not allow me to use one of the public IPs for Jnos. It does not add that IP to the local network list for configuration, and therfore does not permit traffic to Jnos. I therfore had to use the munge script to build tunnels in Linux. This is ok, because it does protect Jnos from attacks.
Chris,
It appears that you have the same or quite similar setup that I have. I have my Linux box with a public static IP address and use that in the POINTOPOINT line. Eventually, the Linux box will appear in the 2wire and when it does, should automatically allow all traffic to that
static address.
It does exactly that.
(Of course, at present JNOS is locking up after a few hours, but that is unrelated)
If you don't hear from Brett, I am willing to share what I have worked
out.
I still have more to do, but it may get you started. As always, make sure you make a backup of your current setup should it not work as mine
does.
It works just fine save one host on AMPR-NET. I wouldn't care save he is my friend and one of the closest *NOS BBS to my site.
I had also been in touch with AT&T customer service. The suggested I purchase a Motorola router from them. I wish my Linux box was back behind a Cisco on a commercial T1 like it was in the beginning. I had direct 44net-to-inet connectivity. However, the AT&T network is controlled by the packet Gustapo goose stepping with their tight firewall rules. I guess that is good for the brain dead masses, but it kind of makes playing with the stuff we do a pain in the toosh.
Thaks es 73's de Chris KQ6UP
My Linux box can ping his Linux box, so that is good. I am not sure I have the whole doted quad with a forward slash business down. I think this is his encap.txt entry:
route addprivate 44.16.2.32/27 encap 173.60.166.190
Since I believe that 44.16.2.46 is included in that subnet. Is the above subnet 44.16.2.32-64?
Thanks, Chris Maness
_________________________________________ 44Net mailing list 44Net@hamradio.ucsd.edu http://hamradio.ucsd.edu/mailman/listinfo/44net
Thanks, Jim
Chris
On Mon, Feb 27, 2012 at 11:50 AM, Jim Fuller - N7VR n7vr@n7vr.org wrote:
Hi Chris:
The 44.16.2.32/27 subnet is: 44.16.2.32/27 44.16.2.32 to 44.16.2.63
Jim Fuller N7VR -- http://www.n7vr.org International TCP/IP Gateways Robot Operator -- http://www.ampr-gateways.org
MTAPRS NET Server Operator -- http://www.mtaprs.net CWOP-2 -- http://www.wxqa.com IRLP Node 3398 - http://irlp.fuller.net Original ARECC contributor
-----Original Message----- From: Chris Maness [mailto:chris@chrismaness.com] Sent: Sunday, February 26, 2012 5:00 PM To: w6ray@sbcglobal.net; AMPRNet working group Subject: Re: [44net] Intermittent host connectivity issues
On Sun, Feb 26, 2012 at 3:44 PM, Chris Maness chris@chrismaness.com wrote:
On Sun, Feb 26, 2012 at 12:01 PM, Raymond Quinn w6ray@sbcglobal.net
wrote:
Hmmm. I see you have a link with Brett, WA7V.
He also has static addresses, and was able to assign a commercial IP address to his linux box, as well as his NOS side.
You might want to consult him on how that is done.
In the mean time, does your JNOS have a LAN address of 192.168.x.x ??
It is behind a DSL Modem/Router. It is a 2wire. However, I have 5 static IPs. It does not allow me to use one of the public IPs for Jnos. It does not add that IP to the local network list for configuration, and therfore does not permit traffic to Jnos. I therfore had to use the munge script to build tunnels in Linux. This is ok, because it does protect Jnos from attacks.
Chris,
It appears that you have the same or quite similar setup that I have. I have my Linux box with a public static IP address and use that in the POINTOPOINT line. Eventually, the Linux box will appear in the 2wire and when it does, should automatically allow all traffic to that
static address.
It does exactly that.
(Of course, at present JNOS is locking up after a few hours, but that is unrelated)
If you don't hear from Brett, I am willing to share what I have worked
out.
I still have more to do, but it may get you started. As always, make sure you make a backup of your current setup should it not work as mine
does.
It works just fine save one host on AMPR-NET. I wouldn't care save he is my friend and one of the closest *NOS BBS to my site.
I had also been in touch with AT&T customer service. The suggested I purchase a Motorola router from them. I wish my Linux box was back behind a Cisco on a commercial T1 like it was in the beginning. I had direct 44net-to-inet connectivity. However, the AT&T network is controlled by the packet Gustapo goose stepping with their tight firewall rules. I guess that is good for the brain dead masses, but it kind of makes playing with the stuff we do a pain in the toosh.
Thaks es 73's de Chris KQ6UP
My Linux box can ping his Linux box, so that is good. I am not sure I have the whole doted quad with a forward slash business down. I think this is his encap.txt entry:
route addprivate 44.16.2.32/27 encap 173.60.166.190
Since I believe that 44.16.2.46 is included in that subnet. Is the above subnet 44.16.2.32-64?
Thanks, Chris Maness
44Net mailing list 44Net@hamradio.ucsd.edu http://hamradio.ucsd.edu/mailman/listinfo/44net
44Net mailing list 44Net@hamradio.ucsd.edu http://hamradio.ucsd.edu/mailman/listinfo/44net
Just to follow up with everyone on this. The connection issue with Paul was resolved. Since he was the original owner of my munge scripts, his entry in encap.txt was automatically removed from the the output tunnel script. I never checked that, but Paul suggested it, and now we are connecting.
Regards, Chris Maness
On Mon, Feb 27, 2012 at 12:09 PM, Chris Maness chris@chrismaness.com wrote:
Thanks, Jim
Chris
On Mon, Feb 27, 2012 at 11:50 AM, Jim Fuller - N7VR n7vr@n7vr.org wrote:
Hi Chris:
The 44.16.2.32/27 subnet is: 44.16.2.32/27 44.16.2.32 to 44.16.2.63
Jim Fuller N7VR -- http://www.n7vr.org International TCP/IP Gateways Robot Operator -- http://www.ampr-gateways.org
MTAPRS NET Server Operator -- http://www.mtaprs.net CWOP-2 -- http://www.wxqa.com IRLP Node 3398 - http://irlp.fuller.net Original ARECC contributor
-----Original Message----- From: Chris Maness [mailto:chris@chrismaness.com] Sent: Sunday, February 26, 2012 5:00 PM To: w6ray@sbcglobal.net; AMPRNet working group Subject: Re: [44net] Intermittent host connectivity issues
On Sun, Feb 26, 2012 at 3:44 PM, Chris Maness chris@chrismaness.com wrote:
On Sun, Feb 26, 2012 at 12:01 PM, Raymond Quinn w6ray@sbcglobal.net
wrote:
Hmmm. I see you have a link with Brett, WA7V.
He also has static addresses, and was able to assign a commercial IP address to his linux box, as well as his NOS side.
You might want to consult him on how that is done.
In the mean time, does your JNOS have a LAN address of 192.168.x.x ??
It is behind a DSL Modem/Router. It is a 2wire. However, I have 5 static IPs. It does not allow me to use one of the public IPs for Jnos. It does not add that IP to the local network list for configuration, and therfore does not permit traffic to Jnos. I therfore had to use the munge script to build tunnels in Linux. This is ok, because it does protect Jnos from attacks.
Chris,
It appears that you have the same or quite similar setup that I have. I have my Linux box with a public static IP address and use that in the POINTOPOINT line. Eventually, the Linux box will appear in the 2wire and when it does, should automatically allow all traffic to that
static address.
It does exactly that.
(Of course, at present JNOS is locking up after a few hours, but that is unrelated)
If you don't hear from Brett, I am willing to share what I have worked
out.
I still have more to do, but it may get you started. As always, make sure you make a backup of your current setup should it not work as mine
does.
It works just fine save one host on AMPR-NET. I wouldn't care save he is my friend and one of the closest *NOS BBS to my site.
I had also been in touch with AT&T customer service. The suggested I purchase a Motorola router from them. I wish my Linux box was back behind a Cisco on a commercial T1 like it was in the beginning. I had direct 44net-to-inet connectivity. However, the AT&T network is controlled by the packet Gustapo goose stepping with their tight firewall rules. I guess that is good for the brain dead masses, but it kind of makes playing with the stuff we do a pain in the toosh.
Thaks es 73's de Chris KQ6UP
My Linux box can ping his Linux box, so that is good. I am not sure I have the whole doted quad with a forward slash business down. I think this is his encap.txt entry:
route addprivate 44.16.2.32/27 encap 173.60.166.190
Since I believe that 44.16.2.46 is included in that subnet. Is the above subnet 44.16.2.32-64?
Thanks, Chris Maness
44Net mailing list 44Net@hamradio.ucsd.edu http://hamradio.ucsd.edu/mailman/listinfo/44net
44Net mailing list 44Net@hamradio.ucsd.edu http://hamradio.ucsd.edu/mailman/listinfo/44net
-
Chris Maness -
Geoff Joy -
Jim Fuller - N7VR