29 May
2017
29 May
'17
2:07 a.m.
Hello everyone,
Due to an cut instead of copy /paste error, there was a wrong tunnel
interface index detection (it always got the last interface in the system).
So here the a correted version of ampr-ripd (2.1.1) with the fix.
Changelog:
- Fixed a tunnel interface detection error
- No functional changes
Download:
http://www.yo2loj.ro/hamprojects/ampr-ripd-2.1.1.tgz
http://yo2tm.ampr.org/hamprojects/ampr-ripd-2.1.1.tgz
Have fun,
Marius, YO2LOJ
29 May
29 May
3:58 a.m.
Hello everyone,
Due to an cut instead of copy /paste error, there was a wrong tunnel
interface index detection (it always got the last interface in the
system).
So here the a correted version of ampr-ripd (2.1.1) with the fix.
Changelog:
- Fixed a tunnel interface detection error
- No functional changes
Download:
http://www.yo2loj.ro/hamprojects/ampr-ripd-2.1.1.tgz
http://yo2tm.ampr.org/hamprojects/ampr-ripd-2.1.1.tgz
Have fun,
Marius, YO2LOJ
HI Marius,
now it's truly OK here, too! :)
Values become OK on 'tun0' and on 'tunl0' as below:
Max Average Current
In 20.1 kb/s (0.3%) 2216.0 b/s (0.0%) 1928.0 b/s (0.0%)
Out 18.4 kb/s (0.2%) 1016.0 b/s (0.0%) 288.0 b/s (0.0%)
Max Average Current
In 672.0 B/s (0.0%) 276.0 B/s (0.0%) 493.0 B/s (0.0%)
Out 490.0 B/s (0.0%) 149.0 B/s (0.0%) 313.0 B/s (0.0%)
--
73 and ciao, gus i0ojj
A proud member of linux team
Non multa, sed multum
8:08 a.m.
Marius,
With the v2.1.1 fix:
- routes are back to tunl0
- I am receiving RIP44 announcements again!
Thanks and 73,
- Lynwood
KB3VWG
8:17 a.m.
Appears to work fine here also...raspian...
On 2017-05-29 09:08 AM, lleachii--- via 44Net wrote:
(Please trim inclusions from previous messages)
_______________________________________________
Marius,
With the v2.1.1 fix:
- routes are back to tunl0
- I am receiving RIP44 announcements again!
Thanks and 73,
- Lynwood
KB3VWG
_________________________________________
44Net mailing list
44Net(a)hamradio.ucsd.edu
http://hamradio.ucsd.edu/mailman/listinfo/44net
10:32 a.m.
The funny thing is that I never saw that error, since I always restarted
the interface for testing.
So the last interface in the interface list of the system was my ampr0
tunnel, so everything looked all right.
Only when I killed the daemon and restarted it without recreating the
interface was the fault apparent.
On 29.05.2017 09:07, Marius Petrescu wrote:
Hello everyone,
Due to an cut instead of copy /paste error, there was a wrong tunnel
interface index detection (it always got the last interface in the
system).
2733
days inactive
2733
days old
4 comments
4 participants
participants (4)
-
Gustavo Ponza -
lleachii＠aol.com -
Marius Petrescu -
ve1jot