3 Oct
2018
3 Oct
'18
11:19 p.m.
>/Is there a route for 44.0.0.1 in your routing
table?///> Not that I can see. I'm running ampr-ripd.
Probably an older version (before 2.0)?
These had a hard-coded ignore of routes to 44.0.0.1 so it does not appear
in your routing table, and as a result you may send traffic to 44.0.0.1 via
your default route, with your public IP as source address. Then, you get replies.
(whether this actually works depends on your configuration w.r.t. "ip rule" and
using multiple routing tables)
Rob
3 Oct
3 Oct
11:30 p.m.
New subject: EdgeRouter (was Re: Difference between RIPv2 and RIP44)
On 04/10/18 08:19, Rob Janssen wrote:
Probably an older version (before 2.0)?
These had a hard-coded ignore of routes to 44.0.0.1 so it does not appear
in your routing table, and as a result you may send traffic to
44.0.0.1 via
your default route, with your public IP as source address. Then, you
get replies.
(whether this actually works depends on your configuration w.r.t. "ip
rule" and
using multiple routing tables) I updated ampr-ripd in line with recent changes.
Running v2.3. I do
use multiple routing tables as recommended in the documentation.
--
73 de Tony VK3JED/VK3IRL
http://vkradio.com
/Is there a route for 44.0.0.1 in your routing
table?///> Not that I
can see. I'm running ampr-ripd.
2254
days inactive
2254
days old
1 comments
2 participants
participants (2)
-
Rob Janssen -
Tony Langdon