1 Sep
2017
1 Sep
'17
1:12 p.m.
Just remember, in the US, that 70cm data must fit in
100 kHz and be 56
kbauds (Same on the 219 Mhz band), but this is interesting work. 97.305(c)
and 97.307(f)6
We don't have such blanket restrictions here. Operating under the amateur radio
regulations for individuals, you can do whatever you like within the limits of the
band and conforming to established bandplans and social behaviour. With a special permit
for unattended or automatic operation (required e.g. for a repeater) you get a
frequency and bandwidth assigned, no technical details like a baudrate.
Rob
2 Sep
2 Sep
6:46 a.m.
New subject: OFDM Modem
On 2/09/2017 3:12 AM, Rob Janssen wrote:
Similarly in Australia, you can use any emission that fits within the
band on 70cm, but good amateur practice applies, find the best spot in
the bandplan. Being a data mode, the repeater could be operated from
someone's station (if they have a good enough location), or licensed as
a repeater and put on a suitable site. No restrictions on emission
types, but the actual type used would have to be on the repeater licence.
--
73 de Tony VK3JED/VK3IRL
http://vkradio.com
Just remember,
in the US, that 70cm data must fit in 100 kHz and be 56
kbauds (Same on the 219 Mhz band), but this is interesting work.
97.305(c)
and 97.307(f)6
We don't have such blanket restrictions here. Operating under the
amateur radio
regulations for individuals, you can do whatever you like within the
limits of the
band and conforming to established bandplans and social behaviour.
With a special permit
for unattended or automatic operation (required e.g. for a repeater)
you get a
frequency and bandwidth assigned, no technical details like a baudrate.
2638
days inactive
2639
days old
1 comments
2 participants
participants (2)
-
Rob Janssen -
Tony Langdon