Is there any place that i can grab image for raspberry pi that will allow the following
1) ipip
2) option for TNC software with Net/ROM support and TCP/IP If there is Jnos its better for me as i know it from the past (to allow users from radio to gain access)
3) MMDVM support (to allow connect a DMR repeater based on MMDVM and Arduino)
I currently have a working set consist of PI and MMDVM software connected to the arduino running on the AMPRNET
but the Pi dont support IPIP
Is it more easy just to add the IPIP support for my Image ? (please dont tel me "get this and this and compile" as I dont know to compile But if it is only to install something with simple command i can do it )
any help / recommendation is welcome
Regards
Ronen/4Z4ZQ
Ronen Pinchooks (4Z4ZQ) WebSitehttp://www.ronen.org/ www.ronen.org ronen.org (Ronen Pinchooks (4Z4ZQ) WebSite) is hosted by domainavenue.com
Hello Ronen,
I currently have a working set consist of PI and MMDVM software connected to the arduino running on the AMPRNET but the Pi dont support IPIP
I don't understand why you say this when I have a standard Raspbian image running on AMPR w/o any special kernels, etc. I can share with you a simple script I put together that enables the AMPR, ampr-ripd, and then pings a few known hosts that I know work for me.
Is it more easy just to add the IPIP support for my Image ? (please dont tel me "get this and this and compile" as I dont know to compile But if it is only to install something with simple command i can do it )
I would argue that adding IPIP won't be difficult though I do it within the Linux OS side of things. If you want to terminate the tunnels into JNOS, that will take someone else's help. Btw, If you can follow instructions on how to configure MMDVM and JNOS, I'm quite confident you can follow instructions to compile things. :-) It's not hard but it takes more time to install some of the tool chains, etc.
--David KI6ZHD
-
David Ranch -
R P